Tuesday, April 3, 2018

Display PSP on PC 6.61 or Lower PSP CFW RemoteJoy Windows 8 & 10

This is a video on how to install RemoteJoyLite on your PSP running CFW 6.60 or 6.61 and how to get it running on your Windows 8 or Windows 10 64 Bit operating system.

PSP Disp:  http://www.mediafire.com/file/gdwan65zufyd88z/1542_PSPdisp_v0.6_setup_all_platforms.exe

RemoteJoy:  http://www.mediafire.com/file/22skpk5x2xdcd17/RemoteJoyLite019v2_Updated.rar

Step 1:  After downloading the files go ahead and run the 1542_PSPdisp_v0.6_setup_all_platforms.exe and select "Yes for the prompt. Follow through the installation instructions untill completed.

Step 2:  Extract all the files except the "seplugins" folder from the RemoteJoyLite019v2_Updated.rar You may need and extraction program to do so. you will be extracting the "Driver type B" folder to your desktop as well as the "RemoteJoyLite" folder.

Step 3:  For Windows 8 and Windows 10 users, we need to disable Driver Signature Enforcement.  Go to your settings and select  "Update and Security" once you've selected that select "Recovery" and after that select "Advanced Startup" Your computer is going to reboot and then you need to select "Troubleshoot" next to select is "Advanced options" and then "Startup Settings" once there click next and your PC will reboot again and then press the number 7 on your keyboard to reboot with no Signed Driver Enforcement.

Step 4:  Once rebooted, Access your Computer Management by selecting any folder and locate either Computer/MyPC and RIGHT CLICK on it and select Manage. Then Select Device Manager.

Step 5:  Look for the PSP Driver B and then RIGHT CLICK on that and select "Update Driver" Browse your system for driver Updates and select the "Driver Type B" folder located on your desktop and update the driver. Once that is done we can now finish the process.

Step 6:  Connect your PSP via USB and select the Memory Stick or System Root. Create a folder called "seplugins" and open that up. Once there make three new text documents called GAME, POPS, and VSH.

Step 7:  In all three text documents write the following lines. For PSP 1000, 2000, 3000, E1000, and PSP Go memory sticks it's ms0:/seplugins/RemoteJoyLite.prx 1

For PSP Go System Storage its ef0:/seplugins/RemoteJoyLite.prx 1

Step 8:  Copy the RemoteJoyLite.prx to the seplugins folder on your PSP and then Exit USB mode.

Step 9:  Hit the SELECT button on your PSP to access your VSH menu and then select Plugins manager. If on a lower firmware than 6.60 you'll need to enter Recover mode by either selecting it from the VSH menu or Hard Rebooting and holding the R Trigger at the same time. Be sure that your RemoteJoyLite is enabled and then connect your USB to your PSP and boot the RemoteJoyLite_En.exe on your PC and it should Display!!

No comments:

Post a Comment