This is the New Jailbreak for your Iphone, Ipod, and Ipad all gererations for IOS 5.0.1 Using Redsn0w 0.9.10B2.
Step 1: Download both the Redsn0w and also the 5.0 IOS restore files for your IDevice. Then extract the Redsn0w files and open the redsn0w.exe and go to extras.
Step 2: In the extras screen, select the "select IPSW" button and select the 5.0 IOS version restore for your device and click "OK" and then "Yes" and click Back till you see the "Jailbreak and Extras" screen. and Click Jailbreak and the screen will come up with check boxes.
Step 3: Just check "Install Cydia" and click next and now we put your IDevice into DFU Mode.
Step 4: Connect your IDevice to your computer Via USB and then hold down the Power Button and the Home Button at the same time for about 8 -10 seconds, Once the screen turns off release the Power Button but continue to hold the Home Button untill the screen on the Redsn0w Says identifying build or untill your computer detects the device. Usually takes about 10 -12 seconds
Step 5: Let the Jailbreak run through and DO NOT DISCONNECT YOUR IDEVICE AT ALL or it will mess it up and you will have to Restore 5.0.1 and try again. once the jailbreak is complete and the phone reboots, go to step 6
Step 6: Exit redsn0w and then re-open the redsn0w and go to extras again and select the IOS 5.0 for your device that you downloaded. Once youve done that click "Ok" and then "Yes" and go back to the "Jailbreak and Extras" screen. Your phone should be Booted and connected and now click on the "Extras" icon and select "Just Boot" and its gonna ask for DFU Mode again (Repeat Step 4) and then let it run and DO NOT DISCONNECT AT ALL!!!
Step 7: After it Reboots open Cydia and its going to Cache files and let the phone respring, this takes about 3 - 5 mins. Then Reboot the Device and Repeat Step 6 and your done
Now You have Jailbroken IOS 5.0.1
Redsn0w: http://www.megaupload.com/?d=XLSISRX2
IOS 5.0 Links:
IPhone 3GS: http://appldnld.apple.com/iPhone4/041-8356.20111012.SQRDT/iPhone2,1_5.0_9A334...
IPhone 4 GSM: http://appldnld.apple.com/iPhone4/041-8358.20111012.FFc34/iPhone3,1_5.0_9A334...
IPhone 4 CDMA: http://appldnld.apple.com/iPhone4/041-9743.20111012.vjhfp/iPhone3,3_5.0_9A334...
IPhone 4S: http://appldnld.apple.com/iPhone4/041-1317.20111012.UVTgr/iPhone4,1_5.0_9A334...
iPad: http://appldnld.apple.com/iPhone4/041-8357.20111012.DTOrM/iPad1,1_5.0_9A334_R...
IPad 2 WIFI: http://appldnld.apple.com/iPhone4/041-9618.20111012.Zxb22/iPad2,1_5.0_9A334_R...
IPad 2, 2 GSM: http://appldnld.apple.com/iPhone4/041-9619.20111012.y34Nx/iPad2,2_5.0_9A334_R...
IPad 2,3 CDMA: http://appldnld.apple.com/iPhone4/041-9620.20111012.pnB4r/iPad2,3_5.0_9A334_R...
IPod 3G: http://appldnld.apple.com/iPhone4/061-8360.20111012.New3w/iPod3,1_5.0_9A334_R...
IPod 4G: http://appldnld.apple.com/iPhone4/061-9622.20111012.Evry3/iPod4,1_5.0_9A334_R...
Apple TV 2: http://appldnld.apple.com/AppleTV/061-9621.20111012.Vgijx/AppleTV2,1_4.4_9A33...
Thursday, December 29, 2011
Untether your Tethered Jailbreak 5.0.1
This is a Video on how to make your Tethered Jailbreak on IOS 5.0.1 from using the previous Redsn0w, to Untethered.
Step 1: Take your IDevice and go into Cydia, and go to the search tab and search Carona 5.0.1 Untether.
Step 2: Hit install and allow it to install and Finish. After that press the Restart Springboard tab
Step 3: If you have problems just reboot the phone by holding the menu button and power button and reboot your device.
Congratulations you now have and Untethered Jailbreak on IOS 5.0.1
Step 1: Take your IDevice and go into Cydia, and go to the search tab and search Carona 5.0.1 Untether.
Step 2: Hit install and allow it to install and Finish. After that press the Restart Springboard tab
Step 3: If you have problems just reboot the phone by holding the menu button and power button and reboot your device.
Congratulations you now have and Untethered Jailbreak on IOS 5.0.1
Monday, December 12, 2011
Ubuntu and Windows
This is a video on how to install Ubuntu along side Windows XP/Vista or Windows 7. This is called a dual boot where you have more than one operating system (OS) on your PC or Laptop.
Step 1: Go to ubuntu.com and download the latest Ubuntu software ISO Disc image and burn it to a disc using Windows Disc Image Burner or some other 3rd party program that burns Disc Image Files.
Step 2: Go to your Start menu and Right Click on Computer, on Windows XP it will be the My Computer icon on your desktop, and Click Manage. A window will pop up and on the left side you should see Disc Management, Click Disc Management.
Step 3: This will now show your partitions. Fresh installed OS computers, meaning you just bought it, you should see a Primary C: Partition and a Recovery Partition. Focus on the C: Partition and right click on it on the partition table and select Shrink volume. After it calculates how much you can shrink the partition, select how much you want to shrink out, Recommended about 35GB but you can do more or less if you wish and then hit OK or Shrink and then just leave it like that.
Step 4: After the shrink has been completed, Exit Disc Management and Pop the Ubuntu Disc you have created into your PC or Laptop and then re-boot your Computer.
Step 5: Hit F12 or F9 depending on your Computer, to get to the Boot Manager or Boot Menu and select Boot from CD/DVD and allow it to boot the installer and then proceed.
Step 6: Click install Ubuntu and you should see a Partition screen should come up. Select the partition that you have created and then hit install. When the screen comes up asking for internet, either connect to your Wifi or Ethernet cable and hit next and allow Ubuntu to install. DO NOT Install updates or third party programs yet!!!!!
Step 7: After the installation is complete, the system will Reboot and you will have a Custom Boot screen now every time You boot your Computer. Select Ubuntu Version 11.10 or what every version you downloaded and hit enter. Ubuntu will load and now just run the Updates and your done Ubuntu is Successfully installed.
Link: ubuntu.com
Step 1: Go to ubuntu.com and download the latest Ubuntu software ISO Disc image and burn it to a disc using Windows Disc Image Burner or some other 3rd party program that burns Disc Image Files.
Step 2: Go to your Start menu and Right Click on Computer, on Windows XP it will be the My Computer icon on your desktop, and Click Manage. A window will pop up and on the left side you should see Disc Management, Click Disc Management.
Step 3: This will now show your partitions. Fresh installed OS computers, meaning you just bought it, you should see a Primary C: Partition and a Recovery Partition. Focus on the C: Partition and right click on it on the partition table and select Shrink volume. After it calculates how much you can shrink the partition, select how much you want to shrink out, Recommended about 35GB but you can do more or less if you wish and then hit OK or Shrink and then just leave it like that.
Step 4: After the shrink has been completed, Exit Disc Management and Pop the Ubuntu Disc you have created into your PC or Laptop and then re-boot your Computer.
Step 5: Hit F12 or F9 depending on your Computer, to get to the Boot Manager or Boot Menu and select Boot from CD/DVD and allow it to boot the installer and then proceed.
Step 6: Click install Ubuntu and you should see a Partition screen should come up. Select the partition that you have created and then hit install. When the screen comes up asking for internet, either connect to your Wifi or Ethernet cable and hit next and allow Ubuntu to install. DO NOT Install updates or third party programs yet!!!!!
Step 7: After the installation is complete, the system will Reboot and you will have a Custom Boot screen now every time You boot your Computer. Select Ubuntu Version 11.10 or what every version you downloaded and hit enter. Ubuntu will load and now just run the Updates and your done Ubuntu is Successfully installed.
Link: ubuntu.com
Monday, December 5, 2011
Convery Any File To X Format Factory
This is the Program for Windows XP/Vista and 7 called Format Factory. This program is freeware and allows you to convert any video files to what ever you want, example AVI - MPG, Audio to whatever you want, Example MP3 to FLAC, Any Photo to whatever you want, Example JPG to PNG, and also Rip DVD's and create ISO or CSO files.
INSTALL:
Step 1: After downloading the File Run the Execute file and Hit yes is the security prompt comes up.
Step 2: Hit next and be sure to un-check the check box that says "install Toolbar" cause that will just slow your computer down and you will notice the bottom two will become unavailable and then hit next and then install.
Step 3: After the install is finished leave both check boxes checked and then the program will automatically start and proceed to converting files.
Step 4: Pick what you want to do whether it be Video, Audio, Photo, CD, DVD or ISO to CSO, in this example im going to use video but the same applies to all the same process. Select video and click what you want to convert to so lets say AVI. Click it and a window will pop up. Click add file and select to convert to AVI. This program supports all types, ill you MP4 for my selected video. Now that i selected my XXX.MP4 hit OK and you will see the video is added to the window below. the hit Start and let it convert.
Step 5: Once the conversion is done it should be located in your C:/Users/XXXX/Documents/FFOutput in other words in your My Documents folder. and your done converting
Link: http://www.megaupload.com/?d=VWQTMD5F
INSTALL:
Step 1: After downloading the File Run the Execute file and Hit yes is the security prompt comes up.
Step 2: Hit next and be sure to un-check the check box that says "install Toolbar" cause that will just slow your computer down and you will notice the bottom two will become unavailable and then hit next and then install.
Step 3: After the install is finished leave both check boxes checked and then the program will automatically start and proceed to converting files.
Step 4: Pick what you want to do whether it be Video, Audio, Photo, CD, DVD or ISO to CSO, in this example im going to use video but the same applies to all the same process. Select video and click what you want to convert to so lets say AVI. Click it and a window will pop up. Click add file and select to convert to AVI. This program supports all types, ill you MP4 for my selected video. Now that i selected my XXX.MP4 hit OK and you will see the video is added to the window below. the hit Start and let it convert.
Step 5: Once the conversion is done it should be located in your C:/Users/XXXX/Documents/FFOutput in other words in your My Documents folder. and your done converting
Link: http://www.megaupload.com/?d=VWQTMD5F
FrostWire Install and Info
This is a Video on the New Frost Wire 5 for windows XP/Vista/7. This is a P2P program for Windows, Mac, and Linux. This program allows you to download Torrents off the web. Torrents That you purchase can be downloaded through this program and viewed.
Download the EXE and run it and install Frost Wire.
Be sure to un-check any third party applications or tool-bar's or else your computer will run slower that it should.
After installing select your language and go through the start up screen then proceed to the settings.
Recommended Settings:
Change your Torrent folder to a Frost Wire folder in My Documents
Do not start the program on system start up
Close Frost Wire when exiting
Link: frostwire.com
Download the EXE and run it and install Frost Wire.
Be sure to un-check any third party applications or tool-bar's or else your computer will run slower that it should.
After installing select your language and go through the start up screen then proceed to the settings.
Recommended Settings:
Change your Torrent folder to a Frost Wire folder in My Documents
Do not start the program on system start up
Close Frost Wire when exiting
Link: frostwire.com
Convert Any Video to AVI
This is an application for Windows XP, Vista and Windows 7. This program converts ANY video file you may have into AVI format. Whether it be MP4, MPEG or MKV Video, it will convert it to AVI for you.
This is useful for video editing and also trying to play videos that are not compatible on other devices such as PS3 or an XBOX 360.
After installing run the program and find a video file you wish to convert. Once you've done that, You can either Drag and Drop the video into the window or select the video by hitting the "Add" button.
Once that's done, Hit the "Convert" button with the Check Mark in it and a little Command Prompt (CMD) will come up on your screen and commence.
Allow the video to Convert to AVI and when it says on the bottom of the CMD "Press any key to continue" do so and your done.
Congratulations, you have successfully converted your Video File to AVI and are good to go.
Link: http://www.megaupload.com/?d=5ZFKYY88
NOTE: 3GPP Video files known not to Convert.
This is useful for video editing and also trying to play videos that are not compatible on other devices such as PS3 or an XBOX 360.
After installing run the program and find a video file you wish to convert. Once you've done that, You can either Drag and Drop the video into the window or select the video by hitting the "Add" button.
Once that's done, Hit the "Convert" button with the Check Mark in it and a little Command Prompt (CMD) will come up on your screen and commence.
Allow the video to Convert to AVI and when it says on the bottom of the CMD "Press any key to continue" do so and your done.
Congratulations, you have successfully converted your Video File to AVI and are good to go.
Link: http://www.megaupload.com/?d=5ZFKYY88
NOTE: 3GPP Video files known not to Convert.
Thursday, November 17, 2011
Convert ISOTo EBOOT
This is a Program for Windows XP and Windows Vista/7 and it's called Convert ISO 2 EBOOT. You can use this on any ISO file for PSP GAME FILES. This will convert your ISO files to EBOOT so that you can run them on your PSP running OFW or CFW so thats one thing that good about it, another is that on the newer Light Custom Firmwares (LCFW), some ISO or CSO files have either caused the PSP system to crash or freeze. This fixes that :p
Step 1: Download the ISO2EBOOT.exe and run it and its going to ask you if you want to run and click "yes" or "ok"
Step 2: type in the directory of the ISO file that you wish to convert, I like to use the Desktop to make it easy so have the ISO on the desktop and type the following into the Black txt box "C:\Desktop\XXXXXX.iso" and then click the Dialogue button under the black TXT box and wait.
Step 3: After the program says congratulations complete, on your Desktop you should see an "iso" folder and a "PSP" folder. You can delete the iso folder if you wish and in the PSP folder there is a Game folder and the Folder inside there contains your eboot.
Step 4: Take that folder and place it on your PSP in the ms0:/PSP/GAME folder or if your using Internal HDD on PSP GO, ef0:/PSP/GAME folder and your done.
Link: http://www.megaupload.com/?d=NUUJYB53
Step 1: Download the ISO2EBOOT.exe and run it and its going to ask you if you want to run and click "yes" or "ok"
Step 2: type in the directory of the ISO file that you wish to convert, I like to use the Desktop to make it easy so have the ISO on the desktop and type the following into the Black txt box "C:\Desktop\XXXXXX.iso" and then click the Dialogue button under the black TXT box and wait.
Step 3: After the program says congratulations complete, on your Desktop you should see an "iso" folder and a "PSP" folder. You can delete the iso folder if you wish and in the PSP folder there is a Game folder and the Folder inside there contains your eboot.
Step 4: Take that folder and place it on your PSP in the ms0:/PSP/GAME folder or if your using Internal HDD on PSP GO, ef0:/PSP/GAME folder and your done.
Link: http://www.megaupload.com/?d=NUUJYB53
CFW 6.XX GOD VI Review
This is the New 6.XX GOD VI CFW review for your PSP. I go over the Recovery menu and the VSH options in this firmware. If you like it watch my tutorial on how to install it for all Models :p
CFW 6.XX GOD VI
This is the New GOD VI Custom Firmware (CFW) for All PSP models including Go. You can use this on 6.60, 6.39, 6.35 and 6.20 Official Firmware (OFW) or CFW. After downloading the file provide proceed with the following.
Step 1: Extract files and you will see the following folders: 6.60 GOD VI, 6.39 GOD VI, 6.35 GOD VI and 6.20 GOD VI. Open the folder for your firmware and inside you will see Permanent for PSP 1000 and 2000v1 models and GOD and FastRecovery for PSP 2000v2, 3000 and Go models.
Step 2: After selecting the folder for your firmware, For PSP 1000 and 2000v1 models take the Permanent folder and place it in the ms0:/PSP/GAME folder and for PSP 2000v2, 3000 and Go models place it in the ef0:/PSP/GAME folder.
Step 3: Run the installer from GAME on the PSP for 1000 and 2000v1 models and your done. On the 2000v2, 3000 and Go Models Run the installer from GAME and then set up your settings and use Fast Recovery and your done.
Link: http://www.megaupload.com/?d=NOF60KFJ
NOTE: DO NOT USE PERMANENT ON MODELS HIGHER THAN PSP 2000v2
Step 1: Extract files and you will see the following folders: 6.60 GOD VI, 6.39 GOD VI, 6.35 GOD VI and 6.20 GOD VI. Open the folder for your firmware and inside you will see Permanent for PSP 1000 and 2000v1 models and GOD and FastRecovery for PSP 2000v2, 3000 and Go models.
Step 2: After selecting the folder for your firmware, For PSP 1000 and 2000v1 models take the Permanent folder and place it in the ms0:/PSP/GAME folder and for PSP 2000v2, 3000 and Go models place it in the ef0:/PSP/GAME folder.
Step 3: Run the installer from GAME on the PSP for 1000 and 2000v1 models and your done. On the 2000v2, 3000 and Go Models Run the installer from GAME and then set up your settings and use Fast Recovery and your done.
Link: http://www.megaupload.com/?d=NOF60KFJ
NOTE: DO NOT USE PERMANENT ON MODELS HIGHER THAN PSP 2000v2
Friday, November 11, 2011
Jailbreak IOS 5.0.1 All iDevices
This is the New Jailbreak for your Iphone, Ipod, and Ipad all gererations for IOS 5.0.1 Using Redsn0w B8.
Step 1: Download both the Redsn0w B8 and also the 5.0 IOS restore files for your IDevice. Then extract the Redsn0w files and open the redsn0w.exe and go to extras.
Step 2: In the extras screen, select the "select IPSW" button and select the 5.0 IOS version restore for your device and click "OK" and then "Yes" and click Back till you see the "Jailbreak and Extras" screen. and Click Jailbreak and the screen will come up with check boxes.
Step 3: Just check "Install Cydia" and click next and now we put your IDevice into DFU Mode.
Step 4: Connect your IDevice to your computer Via USB and then hold down the Power Button and the Home Button at the same time for about 8 -10 seconds, Once the screen turns off release the Power Button but continue to hold the Home Button untill the screen on the Redsn0w Says identifying build or untill your computer detects the device. Usually takes about 10 -12 seconds
Step 5: Let the Jailbreak run through and DO NOT DISCONNECT YOUR IDEVICE AT ALL or it will mess it up and you will have to Restore 5.0.1 and try again. once the jailbreak is complete and the phone reboots, go to step 6
Step 6: Exit redsn0w and then re-open the redsn0w and go to extras again and select the IOS 5.0 for your device that you downloaded. Once youve done that click "Ok" and then "Yes" and go back to the "Jailbreak and Extras" screen. Your phone should be Booted and connected and now click on the "Extras" icon and select "Just Boot" and its gonna ask for DFU Mode again (Repeat Step 4) and then let it run and DO NOT DISCONNECT AT ALL!!!
Step 7: After it Reboots open Cydia and its going to Cache files and let the phone respring, this takes about 3 - 5 mins. Then Reboot the Device and Repeat Step 6 and your done
Now You have Jailbroken IOS 5.0.1
Redsn0w: http://www.megaupload.com/?d=I5ZPHT6U
IOS 5.0 Links:
IPhone 3GS: http://appldnld.apple.com/iPhone4/041-8356.20111012.SQRDT/iPhone2,1_5.0_9A334...
IPhone 4 GSM: http://appldnld.apple.com/iPhone4/041-8358.20111012.FFc34/iPhone3,1_5.0_9A334...
IPhone 4 CDMA: http://appldnld.apple.com/iPhone4/041-9743.20111012.vjhfp/iPhone3,3_5.0_9A334...
IPhone 4S: http://appldnld.apple.com/iPhone4/041-1317.20111012.UVTgr/iPhone4,1_5.0_9A334...
iPad: http://appldnld.apple.com/iPhone4/041-8357.20111012.DTOrM/iPad1,1_5.0_9A334_R...
IPad 2 WIFI: http://appldnld.apple.com/iPhone4/041-9618.20111012.Zxb22/iPad2,1_5.0_9A334_R...
IPad 2, 2 GSM: http://appldnld.apple.com/iPhone4/041-9619.20111012.y34Nx/iPad2,2_5.0_9A334_R...
IPad 2,3 CDMA: http://appldnld.apple.com/iPhone4/041-9620.20111012.pnB4r/iPad2,3_5.0_9A334_R...
IPod 3G: http://appldnld.apple.com/iPhone4/061-8360.20111012.New3w/iPod3,1_5.0_9A334_R...
IPod 4G: http://appldnld.apple.com/iPhone4/061-9622.20111012.Evry3/iPod4,1_5.0_9A334_R...
Apple TV 2: http://appldnld.apple.com/AppleTV/061-9621.20111012.Vgijx/AppleTV2,1_4.4_9A33...
Step 1: Download both the Redsn0w B8 and also the 5.0 IOS restore files for your IDevice. Then extract the Redsn0w files and open the redsn0w.exe and go to extras.
Step 2: In the extras screen, select the "select IPSW" button and select the 5.0 IOS version restore for your device and click "OK" and then "Yes" and click Back till you see the "Jailbreak and Extras" screen. and Click Jailbreak and the screen will come up with check boxes.
Step 3: Just check "Install Cydia" and click next and now we put your IDevice into DFU Mode.
Step 4: Connect your IDevice to your computer Via USB and then hold down the Power Button and the Home Button at the same time for about 8 -10 seconds, Once the screen turns off release the Power Button but continue to hold the Home Button untill the screen on the Redsn0w Says identifying build or untill your computer detects the device. Usually takes about 10 -12 seconds
Step 5: Let the Jailbreak run through and DO NOT DISCONNECT YOUR IDEVICE AT ALL or it will mess it up and you will have to Restore 5.0.1 and try again. once the jailbreak is complete and the phone reboots, go to step 6
Step 6: Exit redsn0w and then re-open the redsn0w and go to extras again and select the IOS 5.0 for your device that you downloaded. Once youve done that click "Ok" and then "Yes" and go back to the "Jailbreak and Extras" screen. Your phone should be Booted and connected and now click on the "Extras" icon and select "Just Boot" and its gonna ask for DFU Mode again (Repeat Step 4) and then let it run and DO NOT DISCONNECT AT ALL!!!
Step 7: After it Reboots open Cydia and its going to Cache files and let the phone respring, this takes about 3 - 5 mins. Then Reboot the Device and Repeat Step 6 and your done
Now You have Jailbroken IOS 5.0.1
Redsn0w: http://www.megaupload.com/?d=I5ZPHT6U
IOS 5.0 Links:
IPhone 3GS: http://appldnld.apple.com/iPhone4/041-8356.20111012.SQRDT/iPhone2,1_5.0_9A334...
IPhone 4 GSM: http://appldnld.apple.com/iPhone4/041-8358.20111012.FFc34/iPhone3,1_5.0_9A334...
IPhone 4 CDMA: http://appldnld.apple.com/iPhone4/041-9743.20111012.vjhfp/iPhone3,3_5.0_9A334...
IPhone 4S: http://appldnld.apple.com/iPhone4/041-1317.20111012.UVTgr/iPhone4,1_5.0_9A334...
iPad: http://appldnld.apple.com/iPhone4/041-8357.20111012.DTOrM/iPad1,1_5.0_9A334_R...
IPad 2 WIFI: http://appldnld.apple.com/iPhone4/041-9618.20111012.Zxb22/iPad2,1_5.0_9A334_R...
IPad 2, 2 GSM: http://appldnld.apple.com/iPhone4/041-9619.20111012.y34Nx/iPad2,2_5.0_9A334_R...
IPad 2,3 CDMA: http://appldnld.apple.com/iPhone4/041-9620.20111012.pnB4r/iPad2,3_5.0_9A334_R...
IPod 3G: http://appldnld.apple.com/iPhone4/061-8360.20111012.New3w/iPod3,1_5.0_9A334_R...
IPod 4G: http://appldnld.apple.com/iPhone4/061-9622.20111012.Evry3/iPod4,1_5.0_9A334_R...
Apple TV 2: http://appldnld.apple.com/AppleTV/061-9621.20111012.Vgijx/AppleTV2,1_4.4_9A33...
Wednesday, November 9, 2011
6.XX GOD V Limited Edition CFW
This is the New GOD V Custom Firmware (CFW) for All PSP models including Go. You can use this on 6.60, 6.39, 6.35 and 6.20 Official Firmware (OFW) or CFW. After downloading the file provide proceed with the following.
Step 1: Extract files and you will see the following folders: 6.60 GOD V, 6.39 GOD V, 6.35 GOD V and 6.20 GOD V. Open the folder for your firmware and inside you will see Permanent for PSP 1000 and 2000v1 models and GOD and FastRecovery for PSP 2000v2, 3000 and Go models.
Step 2: After selecting the folder for your firmware, For PSP 1000 and 2000v1 models take the Permanent folder and place it in the ms0:/PSP/GAME folder and for PSP 2000v2, 3000 and Go models place it in the ef0:/PSP/GAME folder.
Step 3: Run the installer from GAME on the PSP for 1000 and 2000v1 models and your done. On the 2000v2, 3000 and Go Models Run the installer from GAME and then set up your settings and use Fast Recovery and your done.
Link: http://www.megaupload.com/?d=YYS4I90P
NOTE: DO NOT USE PERMANENT ON MODELS HIGHER THAN PSP 2000v2
Step 1: Extract files and you will see the following folders: 6.60 GOD V, 6.39 GOD V, 6.35 GOD V and 6.20 GOD V. Open the folder for your firmware and inside you will see Permanent for PSP 1000 and 2000v1 models and GOD and FastRecovery for PSP 2000v2, 3000 and Go models.
Step 2: After selecting the folder for your firmware, For PSP 1000 and 2000v1 models take the Permanent folder and place it in the ms0:/PSP/GAME folder and for PSP 2000v2, 3000 and Go models place it in the ef0:/PSP/GAME folder.
Step 3: Run the installer from GAME on the PSP for 1000 and 2000v1 models and your done. On the 2000v2, 3000 and Go Models Run the installer from GAME and then set up your settings and use Fast Recovery and your done.
Link: http://www.megaupload.com/?d=YYS4I90P
NOTE: DO NOT USE PERMANENT ON MODELS HIGHER THAN PSP 2000v2
SNES on PSP OFW
This is a Super Nintendo Emulator called SNES for your PSP running on Custom Firmware (CFW) and will also run on Official Firmware (OFW) 6.20 or higher. Its installed the same way for both firmwares.
Step 1: After downloading the files extract them and open it and you will see the SNES Euphoria folder.
Step 2: Connect the PSP to USB mode and copy the SNES Euphoria folder to the ms0:/PSP/GAME folder or if on a PSP Go ef0:/PSP/GAME folder.
Step 3: Any SNES ROM's you have open the SNES Euphoria folder in the GAME folder and open the ROM folder and place the ROM's in that folder.
Step 4: Exit USB and launch the emulator and you'll be good just remember that in the Emulator O is the confirmation button not X.
Link: http://www.megaupload.com/?d=SNR46W0J
Step 1: After downloading the files extract them and open it and you will see the SNES Euphoria folder.
Step 2: Connect the PSP to USB mode and copy the SNES Euphoria folder to the ms0:/PSP/GAME folder or if on a PSP Go ef0:/PSP/GAME folder.
Step 3: Any SNES ROM's you have open the SNES Euphoria folder in the GAME folder and open the ROM folder and place the ROM's in that folder.
Step 4: Exit USB and launch the emulator and you'll be good just remember that in the Emulator O is the confirmation button not X.
Link: http://www.megaupload.com/?d=SNR46W0J
Saturday, October 29, 2011
LCFW 6.XX PRO B-10
This is the New Custom Firmware (CFW) 6.60PRO B-10 for all PSP Models.
This is a Light CFW (LCFW) so this will work on PSP 3000 and Go.
PSP 1000 and 2000:
After Downloading the files and extracting them you should see a CIPL folder, FastRecovery folder and a PROUPDATE folder. Take the PROUPDATE and CIPL flasher folders and place them in the ms0:/PSP/GAME folder for either OFW or CFW install and then exit USB mode. On the XMB run the PRO UPDATE and then let it reboot, once you've done that, run the CIPL flasher, if you have one installed already, reinstall it and your done you now have CFW 6.60PRO B-10
PSP 2000V2, 3000 and GO
After Downloading the files and extracting them, take the PROUPDATE folder and place it in the ms0:/PSP/GAME folder as well as the FastRecovery Folder. then exit USB mode and go to the PSP XMB. Run the PRO UPDATE and then let it reboot. After that use the Fast Recovery as your recovery menu and plugin manager.
6.20 CFW: http://www.megaupload.com/?d=2TVVEYB0
6.35 CFW: http://www.megaupload.com/?d=DBJBMGT1
6.39 CFW: http://www.megaupload.com/?d=NB1H5Q17
6.60 CFW: http://www.megaupload.com/?d=UKV329PI
UPDATE TO OFW 6.60
=================
Download this OFW 660.PBP and change the name to EBOOT.PBP and place it in an UPDATE folder in ms0:/PSP/GAME folder and run the installer from the XMB and then use the PRO UPDATE to flash install CFW.
OFW LINK: http://www.megaupload.com/?d=I9RHV7BY
This is a Light CFW (LCFW) so this will work on PSP 3000 and Go.
PSP 1000 and 2000:
After Downloading the files and extracting them you should see a CIPL folder, FastRecovery folder and a PROUPDATE folder. Take the PROUPDATE and CIPL flasher folders and place them in the ms0:/PSP/GAME folder for either OFW or CFW install and then exit USB mode. On the XMB run the PRO UPDATE and then let it reboot, once you've done that, run the CIPL flasher, if you have one installed already, reinstall it and your done you now have CFW 6.60PRO B-10
PSP 2000V2, 3000 and GO
After Downloading the files and extracting them, take the PROUPDATE folder and place it in the ms0:/PSP/GAME folder as well as the FastRecovery Folder. then exit USB mode and go to the PSP XMB. Run the PRO UPDATE and then let it reboot. After that use the Fast Recovery as your recovery menu and plugin manager.
6.20 CFW: http://www.megaupload.com/?d=2TVVEYB0
6.35 CFW: http://www.megaupload.com/?d=DBJBMGT1
6.39 CFW: http://www.megaupload.com/?d=NB1H5Q17
6.60 CFW: http://www.megaupload.com/?d=UKV329PI
UPDATE TO OFW 6.60
=================
Download this OFW 660.PBP and change the name to EBOOT.PBP and place it in an UPDATE folder in ms0:/PSP/GAME folder and run the installer from the XMB and then use the PRO UPDATE to flash install CFW.
OFW LINK: http://www.megaupload.com/?d=I9RHV7BY
CFW 6.60 PRO B-10
This is the New Custom Firmware (CFW) 6.60PRO B-10 for all PSP Models.
This is a Light CFW (LCFW) so this will work on PSP 3000 and Go.
PSP 1000 and 2000:
After Downloading the files and extracting them you should see a CIPL folder, FastRecovery folder and a PROUPDATE folder. Take the PROUPDATE and CIPL flasher folders and place them in the ms0:/PSP/GAME folder for either OFW or CFW install and then exit USB mode. On the XMB run the PRO UPDATE and then let it reboot, once you've done that, run the CIPL flasher, if you have one installed already, reinstall it and your done you now have CFW 6.60PRO B-10
PSP 2000V2, 3000 and GO
After Downloading the files and extracting them, take the PROUPDATE folder and place it in the ms0:/PSP/GAME folder as well as the FastRecovery Folder. then exit USB mode and go to the PSP XMB. Run the PRO UPDATE and then let it reboot. After that use the Fast Recovery as your recovery menu and plugin manager.
6.20 CFW: http://www.megaupload.com/?d=2TVVEYB0
6.35 CFW: http://www.megaupload.com/?d=DBJBMGT1
6.39 CFW: http://www.megaupload.com/?d=NB1H5Q17
6.60 CFW: http://www.megaupload.com/?d=UKV329PI
UPDATE TO OFW 6.60
=================
Download this OFW 660.PBP and change the name to EBOOT.PBP and place it in an UPDATE folder in ms0:/PSP/GAME folder and run the installer from the XMB and then use the PRO UPDATE to flash install CFW.
OFW LINK: http://www.megaupload.com/?d=I9RHV7BY
This is a Light CFW (LCFW) so this will work on PSP 3000 and Go.
PSP 1000 and 2000:
After Downloading the files and extracting them you should see a CIPL folder, FastRecovery folder and a PROUPDATE folder. Take the PROUPDATE and CIPL flasher folders and place them in the ms0:/PSP/GAME folder for either OFW or CFW install and then exit USB mode. On the XMB run the PRO UPDATE and then let it reboot, once you've done that, run the CIPL flasher, if you have one installed already, reinstall it and your done you now have CFW 6.60PRO B-10
PSP 2000V2, 3000 and GO
After Downloading the files and extracting them, take the PROUPDATE folder and place it in the ms0:/PSP/GAME folder as well as the FastRecovery Folder. then exit USB mode and go to the PSP XMB. Run the PRO UPDATE and then let it reboot. After that use the Fast Recovery as your recovery menu and plugin manager.
6.20 CFW: http://www.megaupload.com/?d=2TVVEYB0
6.35 CFW: http://www.megaupload.com/?d=DBJBMGT1
6.39 CFW: http://www.megaupload.com/?d=NB1H5Q17
6.60 CFW: http://www.megaupload.com/?d=UKV329PI
UPDATE TO OFW 6.60
=================
Download this OFW 660.PBP and change the name to EBOOT.PBP and place it in an UPDATE folder in ms0:/PSP/GAME folder and run the installer from the XMB and then use the PRO UPDATE to flash install CFW.
OFW LINK: http://www.megaupload.com/?d=I9RHV7BY
Friday, October 28, 2011
CFW Review 6.60 ME 1.6
This is the Review for the New Custom Firmware (CFW) 6.60 ME 1.6 for PSP 1000 and 2000 hackable models. Do Not use this on anything other than the 1000 or 2000 hackable models. If you enjoy this firmware watch how to install it on my channel or click the annotation at the beginning of this video :p
LCFW 6.60 ME 1.6 PSP 2000v2, 3000 Go
This is the New Light Custom Firmware (LCFW) 6.60ME 1.6 for PSP 2000v2, 3000 and Go models. There is also a CFW for PSP 1000 and 2000 models and the link will be posted below.
After downloading the file for whatever PSP model you have, extract the files to your desktop or open them using an extraction program. You will see the Release 6.60lME folder and then open it. Inside will be the leda folder and the UPDATE folder.
Step 1: Attach the PSP via USB and open the Memory Stick (MS) and on the root of the MS create a folder, If you haven't already, called "seplugins" (NO QUOTES) and open it. Open the Leda folder in the extracted files and you will see a leda.prx and a readme.txt. Take the leda.prx and drag that into the seplugins folder. If you have a previous one in there, replace it with the new one. Now on the PSP seplugins folder create a new txt document called "game" and open that and type in it "ms0:/seplugins/leda.prx 1" or if PSP Go type "ef0:/seplugins/leda.prx 1" and exit and save.
Step 2: Go back to the MS root on the PSP and open the the PSP folder and then the GAME folder and from the extracted files take the Launcher folder and the Installer folder and copy that into ms0:/PSP/GAME and thats it.
NOTE: If you are updating from a lower CFW than 6.60, Download the OFW 6.60.PBP and place that in the UPDATE folder inside ms0:/PSP/GAME.
Step 3: Exit everything and now run the installer from the XMB and your done
CFW: http://www.megaupload.com/?d=QEJ85BH3
LCFW: http://www.megaupload.com/?d=5Z8ZJ8XF
OFW: http://www.megaupload.com/?d=I9RHV7BY
After downloading the file for whatever PSP model you have, extract the files to your desktop or open them using an extraction program. You will see the Release 6.60lME folder and then open it. Inside will be the leda folder and the UPDATE folder.
Step 1: Attach the PSP via USB and open the Memory Stick (MS) and on the root of the MS create a folder, If you haven't already, called "seplugins" (NO QUOTES) and open it. Open the Leda folder in the extracted files and you will see a leda.prx and a readme.txt. Take the leda.prx and drag that into the seplugins folder. If you have a previous one in there, replace it with the new one. Now on the PSP seplugins folder create a new txt document called "game" and open that and type in it "ms0:/seplugins/leda.prx 1" or if PSP Go type "ef0:/seplugins/leda.prx 1" and exit and save.
Step 2: Go back to the MS root on the PSP and open the the PSP folder and then the GAME folder and from the extracted files take the Launcher folder and the Installer folder and copy that into ms0:/PSP/GAME and thats it.
NOTE: If you are updating from a lower CFW than 6.60, Download the OFW 6.60.PBP and place that in the UPDATE folder inside ms0:/PSP/GAME.
Step 3: Exit everything and now run the installer from the XMB and your done
CFW: http://www.megaupload.com/?d=QEJ85BH3
LCFW: http://www.megaupload.com/?d=5Z8ZJ8XF
OFW: http://www.megaupload.com/?d=I9RHV7BY
CFW Install 6.60 ME 1.6 PSP 1000, 2000
This is the New Custom Firmware (CFW) 6.60ME 1.6 for PSP 1000, 2000 models. There is also a Light CFW (LCFW) for PSP 2000v2, 3000 and PSP Go and the link will be posted below. I give a brief on how to install the LCFW but i will make a video for it soon on a PSP Go.
After downloading the file for whatever PSP model you have, extract the files to your desktop or open them using an extraction program. You will see the Release 6.60ME folder and then open it. Inside will be the leda folder and the UPDATE folder.
Step 1: Attach the PSP via USB and open the Memory Stick (MS) and on the root of the MS create a folder, If you haven't already, called "seplugins" (NO QUOTES) and open it. Open the Leda folder in the extracted files and you will see a leda.prx and a readme.txt. Take the leda.prx and drag that into the seplugins folder. If you have a previous one in there, replace it with the new one. Now on the PSP seplugins folder create a new txt document called "game" and open that and type in it "ms0:/seplugins/leda.prx 1" or if PSP Go type "ef0:/seplugins/leda.prx 1" for the LCFW and exit and save.
Step 2: Go back to the MS root on the PSP and open the the PSP folder and then the GAME folder and from the extracted files take the UPDATE folder and copy that into ms0:/PSP/GAME and thats it.
NOTE: If you are updating from a lower CFW than 6.60, Download the OFW 6.60.PBP and place that in the UPDATE folder inside ms0:/PSP/GAME.
Step 3: Exit everything and now run the installer from the XMB and your done
CFW: http://www.megaupload.com/?d=QEJ85BH3
LCFW: http://www.megaupload.com/?d=5Z8ZJ8XF
OFW: http://www.megaupload.com/?d=I9RHV7BY
After downloading the file for whatever PSP model you have, extract the files to your desktop or open them using an extraction program. You will see the Release 6.60ME folder and then open it. Inside will be the leda folder and the UPDATE folder.
Step 1: Attach the PSP via USB and open the Memory Stick (MS) and on the root of the MS create a folder, If you haven't already, called "seplugins" (NO QUOTES) and open it. Open the Leda folder in the extracted files and you will see a leda.prx and a readme.txt. Take the leda.prx and drag that into the seplugins folder. If you have a previous one in there, replace it with the new one. Now on the PSP seplugins folder create a new txt document called "game" and open that and type in it "ms0:/seplugins/leda.prx 1" or if PSP Go type "ef0:/seplugins/leda.prx 1" for the LCFW and exit and save.
Step 2: Go back to the MS root on the PSP and open the the PSP folder and then the GAME folder and from the extracted files take the UPDATE folder and copy that into ms0:/PSP/GAME and thats it.
NOTE: If you are updating from a lower CFW than 6.60, Download the OFW 6.60.PBP and place that in the UPDATE folder inside ms0:/PSP/GAME.
Step 3: Exit everything and now run the installer from the XMB and your done
CFW: http://www.megaupload.com/?d=QEJ85BH3
LCFW: http://www.megaupload.com/?d=5Z8ZJ8XF
OFW: http://www.megaupload.com/?d=I9RHV7BY
CFW Review 6.60 ME 1.5
This is a review of the new Custom Firmware (CFW) 6.60 ME 1.5 permanent CFW for PSP 1000 and 2000 models only!!! Do Not use this on a PSP 2000v2 3000 or PSP Go or it will brick. Enjoy this firmware and i hope this helps you compare :p
Tuesday, October 25, 2011
Screenshot Plugin PRXShot
This is an SEplugin that enables you to be able to take a screenshot on the XMB or in Gameplay on your PSP running on Custom Firmware (CFW) 5.00 to 6.60 on all PSP models. Also works with Light CFW (LCFW).
Step 1: After downloading, extract the files and you will see the prxshot 0.2 folder and open it and then open the prxshot folder inside that folder and find the prxshot.prx.
Step 2: on the PSP, if you haven't already, make an "seplugins" folder on the root of the Memory Stick (MS) or on the root of the HDD if your using a PSP Go. Open the seplugins folder and copy the prxshot.prx into this folder.
Step 3: Create, if you havent already, a VHS.txt and a GAME.txt and in both of them write the following PSP Go HDD "efo:/seplugins/prxshot.prx 1" PSP MS "ms0:/seplugins/prxshot.prx 1" and exit and save both of the text documents.
Step 4: On the PSP go to the Recovery Menu and go to plugins and make sure that the prxshot for GAME and VSH is enabled and go back to the XMB and now in order to take a screenshot on the XMB or in Gameplay just hit the "note" key, the button with the music note on it and it will save the picture to the directory automatically created in the PICTURE directory.
Link: http://www.megaupload.com/?d=7548E26O
Step 1: After downloading, extract the files and you will see the prxshot 0.2 folder and open it and then open the prxshot folder inside that folder and find the prxshot.prx.
Step 2: on the PSP, if you haven't already, make an "seplugins" folder on the root of the Memory Stick (MS) or on the root of the HDD if your using a PSP Go. Open the seplugins folder and copy the prxshot.prx into this folder.
Step 3: Create, if you havent already, a VHS.txt and a GAME.txt and in both of them write the following PSP Go HDD "efo:/seplugins/prxshot.prx 1" PSP MS "ms0:/seplugins/prxshot.prx 1" and exit and save both of the text documents.
Step 4: On the PSP go to the Recovery Menu and go to plugins and make sure that the prxshot for GAME and VSH is enabled and go back to the XMB and now in order to take a screenshot on the XMB or in Gameplay just hit the "note" key, the button with the music note on it and it will save the picture to the directory automatically created in the PICTURE directory.
Link: http://www.megaupload.com/?d=7548E26O
Custom Themes on 6.60
This is the video for people who want Custom Themes (CTF)'s on there PSP running on Custom Firmware (CFW) 6.60 weather it be GOD, PRO or ME CFW.
Step 1: Download and extract the files for the CXMB and after extraction you should see the cxmb folder and inside that folder there should be a support folder, the cxmb.prx and CONF.txt.
Step 2: Copy the cxmb folder containing the Support folder cxmb.prx and the conf.txt to the PSP memory stick (MS) or if you have a PSP Go the HDD root.
Step 3: Make an seplugins folder on the MS or HDD root and open it and inside the seplugins folder create a VSH.txt and inside the VSH.txt write the following MS PSP "ms0:/cxmb/cxmb.prx 1" HDD PSP Go "ef0:/cxmb/cxmb.prx 1" and exit and save the text document.
Step 4: Take your 6.60 CTF files and place them in the ms0:/PSP/THEME folder or ef0:/PSP/THEME folder for PSP Go.
Step 5: Exit USB mode and activate the cxmb with the recovery menu, plugin manager or PRO settings and activate your themes through the basic theme settings.
CXMB: http://www.megaupload.com/?d=1U7TP24S
CTF: http://www.megaupload.com/?d=94YKMV5B
Step 1: Download and extract the files for the CXMB and after extraction you should see the cxmb folder and inside that folder there should be a support folder, the cxmb.prx and CONF.txt.
Step 2: Copy the cxmb folder containing the Support folder cxmb.prx and the conf.txt to the PSP memory stick (MS) or if you have a PSP Go the HDD root.
Step 3: Make an seplugins folder on the MS or HDD root and open it and inside the seplugins folder create a VSH.txt and inside the VSH.txt write the following MS PSP "ms0:/cxmb/cxmb.prx 1" HDD PSP Go "ef0:/cxmb/cxmb.prx 1" and exit and save the text document.
Step 4: Take your 6.60 CTF files and place them in the ms0:/PSP/THEME folder or ef0:/PSP/THEME folder for PSP Go.
Step 5: Exit USB mode and activate the cxmb with the recovery menu, plugin manager or PRO settings and activate your themes through the basic theme settings.
CXMB: http://www.megaupload.com/?d=1U7TP24S
CTF: http://www.megaupload.com/?d=94YKMV5B
Sunday, October 23, 2011
CFW 6.60 ME 1.5
This is the New Custom Firmware (CFW) 6.60ME 1.5 for PSP 1000, 2000 models. There is also a Light CFW (LCFW) for PSP 2000v2, 3000 and PSP Go and the link will be posted below. I give a brief on how to install the LCFW but i will make a video for it soon on a PSP Go.
After downloading the file for whatever PSP model you have, extract the files to your desktop or open them using an extraction program. You will see the Release 6.60ME folder and then open it. Inside will be the leda folder and the UPDATE folder.
Step 1: Attach the PSP via USB and open the Memory Stick (MS) and on the root of the MS create a folder, If you haven't already, called "seplugins" (NO QUOTES) and open it. Open the Leda folder in the extracted files and you will see a leda.prx and a readme.txt. Take the leda.prx and drag that into the seplugins folder. If you have a previous one in there, replace it with the new one. Now on the PSP seplugins folder create a new txt document called "game" and open that and type in it "ms0:/seplugins/leda.prx 1" and exit and save.
Step 2: Go back to the MS root on the PSP and open the the PSP folder and then the GAME folder and from the extracted files take the UPDATE folder and copy that into ms0:/PSP/GAME and thats it.
NOTE: If you are updating from a lower CFW than 6.60, Download the OFW 6.60.PBP and place that in the UPDATE folder inside ms0:/PSP/GAME.
Step 3: Exit everything and now run the installer from the XMB and your done
CFW: http://www.megaupload.com/?d=4HNG86CN
LCFW: http://www.megaupload.com/?d=9TBMTPC5
OFW: http://www.megaupload.com/?d=I9RHV7BY
After downloading the file for whatever PSP model you have, extract the files to your desktop or open them using an extraction program. You will see the Release 6.60ME folder and then open it. Inside will be the leda folder and the UPDATE folder.
Step 1: Attach the PSP via USB and open the Memory Stick (MS) and on the root of the MS create a folder, If you haven't already, called "seplugins" (NO QUOTES) and open it. Open the Leda folder in the extracted files and you will see a leda.prx and a readme.txt. Take the leda.prx and drag that into the seplugins folder. If you have a previous one in there, replace it with the new one. Now on the PSP seplugins folder create a new txt document called "game" and open that and type in it "ms0:/seplugins/leda.prx 1" and exit and save.
Step 2: Go back to the MS root on the PSP and open the the PSP folder and then the GAME folder and from the extracted files take the UPDATE folder and copy that into ms0:/PSP/GAME and thats it.
NOTE: If you are updating from a lower CFW than 6.60, Download the OFW 6.60.PBP and place that in the UPDATE folder inside ms0:/PSP/GAME.
Step 3: Exit everything and now run the installer from the XMB and your done
CFW: http://www.megaupload.com/?d=4HNG86CN
LCFW: http://www.megaupload.com/?d=9TBMTPC5
OFW: http://www.megaupload.com/?d=I9RHV7BY
XMB Control CFW PSP
This is the New XMB control for PSP running on ME, PRO and GOD Custom Firmwares (CFW)'s. This basically puts the Recovery menu on the XMB for you.
After Downloading the File from the link below, Extract the files and you will see the xmbcntrl folder. Take that folder and place it in the ms0:/PSP/GAME folder or on PSP Go ef0:/PSP/GAME folder and exit USB mode and run it from the XMB. If your running CFW ME use the ME installation, If your using PRO or GOD CFW use the PRO install. Reason using this for GOD is because GOD is based off of PRO CFW and its more compatible. Once you've done that you should be ok and PRO Settings should show right above System settings on the XMB.
If you DO NOT see the PRO Settings, don't panic. Go back into USB mode and go to your seplugins folder and open the VSH text. If you have a PSP Go you need to change it to read ef0:/ at the beginning instead of ms0:/ at the beginning cause its probably on the HDD instead of the Memory Stick (MS) especially if you don't have a MS.
Link: http://www.megaupload.com/?d=EL6PXGN7
After Downloading the File from the link below, Extract the files and you will see the xmbcntrl folder. Take that folder and place it in the ms0:/PSP/GAME folder or on PSP Go ef0:/PSP/GAME folder and exit USB mode and run it from the XMB. If your running CFW ME use the ME installation, If your using PRO or GOD CFW use the PRO install. Reason using this for GOD is because GOD is based off of PRO CFW and its more compatible. Once you've done that you should be ok and PRO Settings should show right above System settings on the XMB.
If you DO NOT see the PRO Settings, don't panic. Go back into USB mode and go to your seplugins folder and open the VSH text. If you have a PSP Go you need to change it to read ef0:/ at the beginning instead of ms0:/ at the beginning cause its probably on the HDD instead of the Memory Stick (MS) especially if you don't have a MS.
Link: http://www.megaupload.com/?d=EL6PXGN7
Wednesday, October 5, 2011
6.XX GOD III CFW Review
This is the review for the new CFW 6.XX GOD III for your PSP. you can use this on 6.20, 6.35, 6.39 and 6.60 Official Firmware (OFW) or Custom Firmware (CFW). enjoy the new GOD III CFW for all PSP models.
6.XX GOD III CFW
This is the New GOD III Custom Firmware (CFW) for All PSP models including Go. You can use this on 6.60, 6.39, 6.35 and 6.20 Official Firmware (OFW) or CFW. After downloading the file provide proceed with the following.
Step 1: Extract files and you will see the following folders: 6.60 GOD III, 6.39 GOD III, 6.35 GOD III and 6.20 GOD III. Open the folder for your firmware and inside you will see Permanent for PSP 1000 and 2000v1 models and GOD and FastRecovery for PSP 2000v2, 3000 and Go models.
Step 2: After selecting the folder for your firmware, For PSP 1000 and 2000v1 models take the Permanent folder and place it in the ms0:/PSP/GAME folder and for PSP 2000v2, 3000 and Go models place it in the ef0:/PSP/GAME folder.
Step 3: Run the installer from GAME on the PSP for 1000 and 2000v1 models and your done. On the 2000v2, 3000 and Go Models Run the installer from GAME and then set up your settings and use Fast Recovery and your done.
Link: http://www.megaupload.com/?d=0P8M1RC5
NOTE: DO NOT USE PERMANENT ON MODELS HIGHER THAN PSP 2000v2
Step 1: Extract files and you will see the following folders: 6.60 GOD III, 6.39 GOD III, 6.35 GOD III and 6.20 GOD III. Open the folder for your firmware and inside you will see Permanent for PSP 1000 and 2000v1 models and GOD and FastRecovery for PSP 2000v2, 3000 and Go models.
Step 2: After selecting the folder for your firmware, For PSP 1000 and 2000v1 models take the Permanent folder and place it in the ms0:/PSP/GAME folder and for PSP 2000v2, 3000 and Go models place it in the ef0:/PSP/GAME folder.
Step 3: Run the installer from GAME on the PSP for 1000 and 2000v1 models and your done. On the 2000v2, 3000 and Go Models Run the installer from GAME and then set up your settings and use Fast Recovery and your done.
Link: http://www.megaupload.com/?d=0P8M1RC5
NOTE: DO NOT USE PERMANENT ON MODELS HIGHER THAN PSP 2000v2
6.XX GOD II CFW Review
This is the New Custom Firmware (CFW) 6.XX GOD II for all PSP Models including Go. A few bug fixes here and there and another great Review for you guys :)
6.XX GOD II CFW
This is the New GOD II Custom Firmware (CFW) for All PSP models including Go. You can use this on 6.60, 6.39, 6.35 and 6.20 Official Firmware (OFW) or CFW. After downloading the file provide proceed with the following.
Step 1: Extract files and you will see the following folders: 6.60 GOD II, 6.39 GOD II, 6.35 GOD II and 6.20 GOD II. Open the folder for your firmware and inside you will see Permanent for PSP 1000 and 2000v1 models and GOD and FastRecovery for PSP 2000v2, 3000 and Go models.
Step 2: After selecting the folder for your firmware, For PSP 1000 and 2000v1 models take the Permanent folder and place it in the ms0:/PSP/GAME folder and for PSP 2000v2, 3000 and Go models place it in the ef0:/PSP/GAME folder.
Step 3: Run the installer from GAME on the PSP for 1000 and 2000v1 models and your done. On the 2000v2, 3000 and Go Models Run the installer from GAME and then set up your settings and use Fast Recovery and your done.
Link: http://www.megaupload.com/?d=IJO3DH3U
NOTE: DO NOT USE PERMANENT ON MODELS HIGHER THAN PSP 2000v2
Step 1: Extract files and you will see the following folders: 6.60 GOD II, 6.39 GOD II, 6.35 GOD II and 6.20 GOD II. Open the folder for your firmware and inside you will see Permanent for PSP 1000 and 2000v1 models and GOD and FastRecovery for PSP 2000v2, 3000 and Go models.
Step 2: After selecting the folder for your firmware, For PSP 1000 and 2000v1 models take the Permanent folder and place it in the ms0:/PSP/GAME folder and for PSP 2000v2, 3000 and Go models place it in the ef0:/PSP/GAME folder.
Step 3: Run the installer from GAME on the PSP for 1000 and 2000v1 models and your done. On the 2000v2, 3000 and Go Models Run the installer from GAME and then set up your settings and use Fast Recovery and your done.
Link: http://www.megaupload.com/?d=IJO3DH3U
NOTE: DO NOT USE PERMANENT ON MODELS HIGHER THAN PSP 2000v2
Wednesday, September 28, 2011
Review GOD A CFW
This is a Review of the new Custom Firmware (CFW) 6.60 GOD-A and i just simply show it Capabilities. Enjoy
6.XX GOD A CFW
This is the New GOD A Custom Firmware (CFW) for All PSP models including Go. You can use this on 6.60, 6.39, 6.35 and 6.20 Official Firmware (OFW) or CFW. After downloading the file provide proceed with the following.
Step 1: Extract files and you will see the following folders: 6.60 GOD A, 6.39 GOD A, 6.35 GOD A and 6.20 GOD A. Open the folder for your firmware and inside you will see Permanent for PSP 1000 and 2000v1 models and GOD and FastRecovery for PSP 2000v2, 3000 and Go models.
Step 2: After selecting the folder for your firmware, For PSP 1000 and 2000v1 models take the Permanent folder and place it in the ms0:/PSP/GAME folder and for PSP 2000v2, 3000 and Go models place it in the ef0:/PSP/GAME folder.
Step 3: Run the installer from GAME on the PSP for 1000 and 2000v1 models and your done. On the 2000v2, 3000 and Go Models Run the installer from GAME and then set up your settings and use Fast Recovery and your done.
Link: http://www.megaupload.com/?d=0FRWLUA5
NOTE: DO NOT USE PERMANENT ON MODELS HIGHER THAN PSP 2000v2
Step 1: Extract files and you will see the following folders: 6.60 GOD A, 6.39 GOD A, 6.35 GOD A and 6.20 GOD A. Open the folder for your firmware and inside you will see Permanent for PSP 1000 and 2000v1 models and GOD and FastRecovery for PSP 2000v2, 3000 and Go models.
Step 2: After selecting the folder for your firmware, For PSP 1000 and 2000v1 models take the Permanent folder and place it in the ms0:/PSP/GAME folder and for PSP 2000v2, 3000 and Go models place it in the ef0:/PSP/GAME folder.
Step 3: Run the installer from GAME on the PSP for 1000 and 2000v1 models and your done. On the 2000v2, 3000 and Go Models Run the installer from GAME and then set up your settings and use Fast Recovery and your done.
Link: http://www.megaupload.com/?d=0FRWLUA5
NOTE: DO NOT USE PERMANENT ON MODELS HIGHER THAN PSP 2000v2
Thursday, September 22, 2011
CFW 6.60ME 1.4
This is the New Custom Firmware (CFW) 6.60ME 1.4 for PSP 1000, 2000 models. There is also a Light CFW (LCFW) for PSP 2000v2, 3000 and PSP Go and the link will be posted below. I give a brief on how to install the LCFW but i will make a video for it soon on a PSP Go.
After downloading the file for whatever PSP model you have, extract the files to your desktop or open them using an extraction program. You will see the Release 6.60ME folder and then open it. Inside will be the leda folder and the UPDATE folder.
Step 1: Attach the PSP via USB and open the Memory Stick (MS) and on the root of the MS create a folder, If you haven't already, called "seplugins" (NO QUOTES) and open it. Open the Leda folder in the extracted files and you will see a leda.prx and a readme.txt. Take the leda.prx and drag that into the seplugins folder. If you have a previous one in there, replace it with the new one. Now on the PSP seplugins folder create a new txt document called "game" and open that and type in it "ms0:/seplugins/leda.prx 1" and exit and save.
Step 2: Go back to the MS root on the PSP and open the the PSP folder and then the GAME folder and from the extracted files take the UPDATE folder and copy that into ms0:/PSP/GAME and thats it.
NOTE: If you are updating from a lower CFW than 6.60, Download the OFW 6.60.PBP and place that in the UPDATE folder inside ms0:/PSP/GAME.
Step 3: Exit everything and now run the installer from the XMB and your done
CFW: http://www.megaupload.com/?d=Z29XVY57
LCFW: http://www.megaupload.com/?d=17AO3WPZ
OFW: http://www.megaupload.com/?d=I9RHV7BY
After downloading the file for whatever PSP model you have, extract the files to your desktop or open them using an extraction program. You will see the Release 6.60ME folder and then open it. Inside will be the leda folder and the UPDATE folder.
Step 1: Attach the PSP via USB and open the Memory Stick (MS) and on the root of the MS create a folder, If you haven't already, called "seplugins" (NO QUOTES) and open it. Open the Leda folder in the extracted files and you will see a leda.prx and a readme.txt. Take the leda.prx and drag that into the seplugins folder. If you have a previous one in there, replace it with the new one. Now on the PSP seplugins folder create a new txt document called "game" and open that and type in it "ms0:/seplugins/leda.prx 1" and exit and save.
Step 2: Go back to the MS root on the PSP and open the the PSP folder and then the GAME folder and from the extracted files take the UPDATE folder and copy that into ms0:/PSP/GAME and thats it.
NOTE: If you are updating from a lower CFW than 6.60, Download the OFW 6.60.PBP and place that in the UPDATE folder inside ms0:/PSP/GAME.
Step 3: Exit everything and now run the installer from the XMB and your done
CFW: http://www.megaupload.com/?d=Z29XVY57
LCFW: http://www.megaupload.com/?d=17AO3WPZ
OFW: http://www.megaupload.com/?d=I9RHV7BY
Saturday, September 10, 2011
Change your PS3 Hard Drive
This is a video on how to Change your PS3's Hard Drive (HDD). You must use a SATA HDD it cannot be IDE.
Step 1: Remove Door/Flap on the bottom of the PS3.
Step 2: Remove Blue Screw.
Step 3: Turn the PS3 so that your reading "PlayStation 3 correctly and turn the hinge on the HDD port out and slide it to the right first and then pull out towards you and you will be holding the HDD.
Step 4: Remove all four (4) screws on the HDD holder and slide out the HDD.
Step 5: Place the NEW HDD in the holder and put the four (4) screws back in to secure the HDD. Make sure that the SATA ports are exposed and are not blocked.
Step 6: Slide in the holder with the hinge facing out and now slide it to the left and it will click/secure into place.
Step 7: Put back the blue screw and place the door/cover back on
Step 8: Plug in your AC (power), AV cables (Audio Video), Ethernet and boot up the system.
Step 9: Format the HDD and wait.
Step 10: Reboot the system and wait for your PS3 to boot to the XMB and your done.
NOTE: Be SURE to back up all SAVE DATA before doing this Also must re-download all GAME DATA UTILITY once this is done
Step 1: Remove Door/Flap on the bottom of the PS3.
Step 2: Remove Blue Screw.
Step 3: Turn the PS3 so that your reading "PlayStation 3 correctly and turn the hinge on the HDD port out and slide it to the right first and then pull out towards you and you will be holding the HDD.
Step 4: Remove all four (4) screws on the HDD holder and slide out the HDD.
Step 5: Place the NEW HDD in the holder and put the four (4) screws back in to secure the HDD. Make sure that the SATA ports are exposed and are not blocked.
Step 6: Slide in the holder with the hinge facing out and now slide it to the left and it will click/secure into place.
Step 7: Put back the blue screw and place the door/cover back on
Step 8: Plug in your AC (power), AV cables (Audio Video), Ethernet and boot up the system.
Step 9: Format the HDD and wait.
Step 10: Reboot the system and wait for your PS3 to boot to the XMB and your done.
NOTE: Be SURE to back up all SAVE DATA before doing this Also must re-download all GAME DATA UTILITY once this is done
Friday, September 2, 2011
6.XX OFW Downgrader tool
This is how you downgrade and Official Firmware (OFW) higher than 6.20 back down to 6.20 OFW on your PSP. This again is able to be used on OFW PSP's and also use this at your own risk.
Take the file after downloading and extract the folder 6.XX Downgrader and place it in the ms0:/PSP/GAME folder and run it from the XMB and hit X to start the downgrade.
Link: http://www.megaupload.com/?d=FXNXM52C
NOTE: USE AT YOUR OWN RISK
RemoteJoyLite Video tutorial: http://www.youtube.com/watch?v=VwJMuFmTjgk
Take the file after downloading and extract the folder 6.XX Downgrader and place it in the ms0:/PSP/GAME folder and run it from the XMB and hit X to start the downgrade.
Link: http://www.megaupload.com/?d=FXNXM52C
NOTE: USE AT YOUR OWN RISK
RemoteJoyLite Video tutorial: http://www.youtube.com/watch?v=VwJMuFmTjgk
Review CFW 6.60 PRO B-9
This is the Review for Custom Firmware (CFW) or Light CFW (LCFW) 6.60 PRO B-9 for all PSP models. if you would like to update to this firmware follow my tutorial video on it here
Tutorial: http://www.youtube.com/watch?v=wHiercK1aQs
This also runs very good with the PSN so HORRAYYYYYYYYYYYY
Learn how to install RemoteJoyLite here
http://www.youtube.com/watch?v=VwJMuFmTjgk
Tutorial: http://www.youtube.com/watch?v=wHiercK1aQs
This also runs very good with the PSN so HORRAYYYYYYYYYYYY
Learn how to install RemoteJoyLite here
http://www.youtube.com/watch?v=VwJMuFmTjgk
Sunday, August 28, 2011
New LCFW 6.60PRO B-9 PSP 3000 and Go
This is the New Custom Firmware (CFW) 6.60PRO B-9 for all PSP Models.
This is a Light CFW (LCFW) so this will work on PSP 3000 and Go.
PSP 1000 and 2000:
After Downloading the files and extracting them you should see a CIPL folder, FastRecovery folder and a PROUPDATE folder. Take the PROUPDATE and CIPL flasher folders and place them in the ms0:/PSP/GAME folder for either OFW or CFW install and then exit USB mode. On the XMB run the PRO UPDATE and then let it reboot, once you've done that, run the CIPL flasher, if you have one installed already, reinstall it and your done you now have CFW 6.60PRO B-9
PSP 2000V2, 3000 and GO
After Downloading the files and extracting them, take the PROUPDATE folder and place it in the ms0:/PSP/GAME folder as well as the FastRecovery Folder. then exit USB mode and go to the PSP XMB. Run the PRO UPDATE and then let it reboot. After that use the Fast Recovery as your recovery menu and plugin manager.
CFW LINK: http://www.megaupload.com/?d=KETQPDC2
UPDATE TO OFW 6.60
=================
Download this OFW 660.PBP and change the name to EBOOT.PBP and place it in an UPDATE folder in ms0:/PSP/GAME folder and run the installer from the XMB and then use the PRO UPDATE to flash install CFW.
OFW LINK: http://www.megaupload.com/?d=I9RHV7BY
This is a Light CFW (LCFW) so this will work on PSP 3000 and Go.
PSP 1000 and 2000:
After Downloading the files and extracting them you should see a CIPL folder, FastRecovery folder and a PROUPDATE folder. Take the PROUPDATE and CIPL flasher folders and place them in the ms0:/PSP/GAME folder for either OFW or CFW install and then exit USB mode. On the XMB run the PRO UPDATE and then let it reboot, once you've done that, run the CIPL flasher, if you have one installed already, reinstall it and your done you now have CFW 6.60PRO B-9
PSP 2000V2, 3000 and GO
After Downloading the files and extracting them, take the PROUPDATE folder and place it in the ms0:/PSP/GAME folder as well as the FastRecovery Folder. then exit USB mode and go to the PSP XMB. Run the PRO UPDATE and then let it reboot. After that use the Fast Recovery as your recovery menu and plugin manager.
CFW LINK: http://www.megaupload.com/?d=KETQPDC2
UPDATE TO OFW 6.60
=================
Download this OFW 660.PBP and change the name to EBOOT.PBP and place it in an UPDATE folder in ms0:/PSP/GAME folder and run the installer from the XMB and then use the PRO UPDATE to flash install CFW.
OFW LINK: http://www.megaupload.com/?d=I9RHV7BY
CFW 6.60ME 1.2 Bug Fix
This is the New Custom Firmware (CFW) 6.60ME 1.2 This fixes a few bugs and also enables a new CPU feature.
CFW INSTALL:
Take the files after downloading and extract them and you should see the release folder. On the root of the PSP memory Stick create a folder, if you haven't already, and call it "seplugins" (NO QUOTES) and open that up. Create a "game.txt" or open the one you already have up and inside write "ms0:/seplugins/leda.prx 1" and then exit and save the txt document. Once that has been done open up the leda folder in the extracted files and the drag and drop the leda.prx into the seplugins folder. If you have one there already, replace it just to be safe.
Now take the UPDATE folder from the extracted files and drag and drop the UPDATE folder into the PSP game folder other known as ms0:/PSP/GAME and then exit USB mode and run the installer on the XMB and your done.
If you are running CFW lower than 6.60, all you need to do is take the OFW Sony 660.PBP that i have for download and place it in the UPDATE folder inside the PSP GAME folder along with the CFW installer for ME 1.2
CFW: http://www.megaupload.com/?d=HR47S3K0
OFW: http://www.megaupload.com/?d=I9RHV7BY
NOTE: This is only for PSP 1000 and 2000 hackable models
CFW INSTALL:
Take the files after downloading and extract them and you should see the release folder. On the root of the PSP memory Stick create a folder, if you haven't already, and call it "seplugins" (NO QUOTES) and open that up. Create a "game.txt" or open the one you already have up and inside write "ms0:/seplugins/leda.prx 1" and then exit and save the txt document. Once that has been done open up the leda folder in the extracted files and the drag and drop the leda.prx into the seplugins folder. If you have one there already, replace it just to be safe.
Now take the UPDATE folder from the extracted files and drag and drop the UPDATE folder into the PSP game folder other known as ms0:/PSP/GAME and then exit USB mode and run the installer on the XMB and your done.
If you are running CFW lower than 6.60, all you need to do is take the OFW Sony 660.PBP that i have for download and place it in the UPDATE folder inside the PSP GAME folder along with the CFW installer for ME 1.2
CFW: http://www.megaupload.com/?d=HR47S3K0
OFW: http://www.megaupload.com/?d=I9RHV7BY
NOTE: This is only for PSP 1000 and 2000 hackable models
Tuesday, August 23, 2011
RemoteJoyLite Install on 6.60
This is Remote Joy Lite for your PSP running on Custom Firmware 6.60ME. This will also work on 5.00, 5.50, 6.20, and 6.3X CFW's.
In order for this to work properly you need to install the drivers and i will show you step by step on how to do this.
Step 1: Take the Remote Joy Lite files and extract them to the desktop of your PC and then open the folder.
Step 2: Take your PSP and connect it into USB mode and make a folder on the Memory Stick (MS) root called "seplugins" (NO QUOTES). Open that folder and place the RemoteJoyLite.prx inside this folder.
Step 3: Create a vsh.txt a game.txt and a pops.txt file(s) in the seplugins folder and inside the game and vsh txt files write "mso:/seplugins/RemoteJoyLite.prx 1" (NO QUOTES) and exit and save. In the pops.txt write the same thing as in the game and vsh txt files but also add "flash0:/kd/usb.prx 1" (NO QUOTES) and exit and save.
Step 4: Disconnect the PSP from USB mode and take out the USB. now run the PSPdisp installer that i have for download. Say YES to everything and when you get to the screen that says to locate the GAME5XX folder hit cancel and continue saying YES to all.
Step 5: plugin the usb and the driver should install fine. If not run the PSPdisp again only this time with the USB plugged into the PSP with it on the XMB Screen.
Enjoy your PC screen view of your PSP :p
NOTE: if your display crashes, hit select on the XMB on the PSP and hit reset device, in the middle of the reset, unplug the USB but dont close PSPDisp or Remote Joy. once XMB boots back up, plug in the USB.
PSPDisp: http://www.megaupload.com/?d=07UOCTB1
Remote Joy: http://www.megaupload.com/?d=HZ3HGMXV
In order for this to work properly you need to install the drivers and i will show you step by step on how to do this.
Step 1: Take the Remote Joy Lite files and extract them to the desktop of your PC and then open the folder.
Step 2: Take your PSP and connect it into USB mode and make a folder on the Memory Stick (MS) root called "seplugins" (NO QUOTES). Open that folder and place the RemoteJoyLite.prx inside this folder.
Step 3: Create a vsh.txt a game.txt and a pops.txt file(s) in the seplugins folder and inside the game and vsh txt files write "mso:/seplugins/RemoteJoyLite.prx 1" (NO QUOTES) and exit and save. In the pops.txt write the same thing as in the game and vsh txt files but also add "flash0:/kd/usb.prx 1" (NO QUOTES) and exit and save.
Step 4: Disconnect the PSP from USB mode and take out the USB. now run the PSPdisp installer that i have for download. Say YES to everything and when you get to the screen that says to locate the GAME5XX folder hit cancel and continue saying YES to all.
Step 5: plugin the usb and the driver should install fine. If not run the PSPdisp again only this time with the USB plugged into the PSP with it on the XMB Screen.
Enjoy your PC screen view of your PSP :p
NOTE: if your display crashes, hit select on the XMB on the PSP and hit reset device, in the middle of the reset, unplug the USB but dont close PSPDisp or Remote Joy. once XMB boots back up, plug in the USB.
PSPDisp: http://www.megaupload.com/?d=07UOCTB1
Remote Joy: http://www.megaupload.com/?d=HZ3HGMXV
Review CFW 6.60ME
This is a review of Custom Firmware (CFW) 6.60ME. I get to test out the new Remote Joy Lite on it too :D anywaysssssss, Ill be giving the demonstration and also the recommended settings on this firmware be sure to watch the tutorial on how to install this here
Link: http://www.youtube.com/watch?v=tqClmx3N0_c
Or Clink the link in the beginning of this video
Link: http://www.youtube.com/watch?v=tqClmx3N0_c
Or Clink the link in the beginning of this video
Tuesday, August 16, 2011
NEW CFW 6.60ME
This is the New Custom Firmware (CFW) 6.60ME. This is for PSP 1000 and 2000 hackable models only. No Light (CFW) [LCFW] yet but will come soon.
So i kinda got messed up in this video cause the Readme.txt was messed up so i fixed the files for you so you'll have no trouble :)
After downloading the CFW files if you open it or extract them you will see the release folder for 6.60ME, open that and you should see an UPDATE folder and a leda folder. Take the UPDATE folder and place it in the ms0:/PSP/GAME folder on the PSP Memory Stick (MS). Once you have done that take the leda folder in the downloaded files and open it and you should see a game.txt and the leda.prx. On the Root of the PSP MS make, if you haven't already, an seplugins folder al in lowercase letters and open it and copy the game.txt and the leda.prx from the downloaded files into this folder and make sure the game.txt has this written in it "ms0:/seplugins/leda.prx 1" (NO QUOTES).
If you have had ME CFW before be sure that you replace th leda.prx with the new one.
CFW: http://www.megaupload.com/?d=P7RD077D
OFW: http://www.megaupload.com/?d=I9RHV7BY
So i kinda got messed up in this video cause the Readme.txt was messed up so i fixed the files for you so you'll have no trouble :)
After downloading the CFW files if you open it or extract them you will see the release folder for 6.60ME, open that and you should see an UPDATE folder and a leda folder. Take the UPDATE folder and place it in the ms0:/PSP/GAME folder on the PSP Memory Stick (MS). Once you have done that take the leda folder in the downloaded files and open it and you should see a game.txt and the leda.prx. On the Root of the PSP MS make, if you haven't already, an seplugins folder al in lowercase letters and open it and copy the game.txt and the leda.prx from the downloaded files into this folder and make sure the game.txt has this written in it "ms0:/seplugins/leda.prx 1" (NO QUOTES).
If you have had ME CFW before be sure that you replace th leda.prx with the new one.
CFW: http://www.megaupload.com/?d=P7RD077D
OFW: http://www.megaupload.com/?d=I9RHV7BY
Tuesday, August 9, 2011
New CFW 6.39ME-9.2
This is a new Custom Firmware (CFW) that came out for PSP 1000 and 2000 models and this is how to install CFW 6.39ME-9.2 This firmware fixes a couple bugs and also adds a few more things.
Take the file that i have for download and extract the files to your destop and open them. take the UPDATE folder and place it in the ms0:/PSP/GAME folder and then take the leda folder and open it and if not already, create a folder called seplugins on the memory stick (MS) root of the PSP and open it. then place the leda.prx file inside the seplugins folder. after that create a new txt document called GAME.txt and inside type "ms0:/seplugins/leda.prx 1" (no quotes) and then exit and save.
once all thats done, exit USB mode and then run the installer under game and your done.
NOTE: ONLY FOR PSP 1000 AND 2000 MODELS ONLY WORKS ON 6.39 CFW (NOT SIGNED)
Link: http://www.megaupload.com/?d=YM3EK66E
Take the file that i have for download and extract the files to your destop and open them. take the UPDATE folder and place it in the ms0:/PSP/GAME folder and then take the leda folder and open it and if not already, create a folder called seplugins on the memory stick (MS) root of the PSP and open it. then place the leda.prx file inside the seplugins folder. after that create a new txt document called GAME.txt and inside type "ms0:/seplugins/leda.prx 1" (no quotes) and then exit and save.
once all thats done, exit USB mode and then run the installer under game and your done.
NOTE: ONLY FOR PSP 1000 AND 2000 MODELS ONLY WORKS ON 6.39 CFW (NOT SIGNED)
Link: http://www.megaupload.com/?d=YM3EK66E
Sunday, July 31, 2011
Backup Jailbroken Apps
This is a video on how to backup and restore your jailbroken apps and other things likes tweeks, themes, ringtones, settings, SBsettings, sources, etc.
Go into Cydia and your going to go and search for xBackup. Once you have that, you can now install it and then after exit Cydia. Open up xBackup and hit backup and it will create a backup point titled "todays date" click it and upload it.
After Updating or Restoring your iPhone, iPod, iPad, to 4.3.3 Re-Jailbreak the device and go into Cydia and download xBackup and install it. after that open it and go to the restore section and select the date, and hit download. then hit restore and wait about 5 to 10 seconds. then all your jailbroken stuff will return.
Go into Cydia and your going to go and search for xBackup. Once you have that, you can now install it and then after exit Cydia. Open up xBackup and hit backup and it will create a backup point titled "todays date" click it and upload it.
After Updating or Restoring your iPhone, iPod, iPad, to 4.3.3 Re-Jailbreak the device and go into Cydia and download xBackup and install it. after that open it and go to the restore section and select the date, and hit download. then hit restore and wait about 5 to 10 seconds. then all your jailbroken stuff will return.
Format any Memory Stick, Flashdrive or Hard Drive
This is a video on how to Format any Hard Drive, Memory Stick and Flashdrives using Windows Vista, 7 or Server. Simply just right Click on the device you wish to format and you can choose to format to NTFS, FAT, FAT32 or exFAT and then hit format.
This is good for when you buy Flashdrives that sometimes have unnecessary software on them sometimes even Malware.
NOTE: When formating a Flash Drive always uncheck "Quick Format"
This is good for when you buy Flashdrives that sometimes have unnecessary software on them sometimes even Malware.
NOTE: When formating a Flash Drive always uncheck "Quick Format"
Saturday, July 30, 2011
CFW 6.39ME-9 PSP 2000
This is Custom Firmware (CFW) 6.39ME-9 for PSP 1000 and 2000 models. After Downloading the files with the links below, these are the steps
Step 1: Open or Extract the LCFW files out of the first package, place both folders for the installer and the launcher in the ms0:/PSP/GAME folder.
Step 2: go to the rot of the PSP memory stick (MS) and either open or create the seplugins folder. in the LCFW files open the leda folder and place the leda.prx file in the seplugins folder. now either create the game.txt or open the game.txt and instide write "ms0:/seplugins/leda.prx 1" (no quotes) and exit and save.
Step 3: no go back to the PSP GAME folder and open up the CFW download files and you wil see an UPDATE folder. Place the UPDATE folder in the ms0:/PSP/GAME folder and then go to step 4
Step 4: run the installer for the LME and let it do its thing, after it brings you back to the XMB run the Launcher for the LME and then after that takes you back to the XMB run the UPDATE and your done. Make sure you do it in that order too.
LCFW: http://www.mediafire.com/?b3q248vond3dzz3
CFW: http://www.mediafire.com/?ijcbbk5uhhxzd96
Step 1: Open or Extract the LCFW files out of the first package, place both folders for the installer and the launcher in the ms0:/PSP/GAME folder.
Step 2: go to the rot of the PSP memory stick (MS) and either open or create the seplugins folder. in the LCFW files open the leda folder and place the leda.prx file in the seplugins folder. now either create the game.txt or open the game.txt and instide write "ms0:/seplugins/leda.prx 1" (no quotes) and exit and save.
Step 3: no go back to the PSP GAME folder and open up the CFW download files and you wil see an UPDATE folder. Place the UPDATE folder in the ms0:/PSP/GAME folder and then go to step 4
Step 4: run the installer for the LME and let it do its thing, after it brings you back to the XMB run the Launcher for the LME and then after that takes you back to the XMB run the UPDATE and your done. Make sure you do it in that order too.
LCFW: http://www.mediafire.com/?b3q248vond3dzz3
CFW: http://www.mediafire.com/?ijcbbk5uhhxzd96
Saturday, July 16, 2011
YouTube to MP3 Format
This is a video on how to get your favorite YouTube videos into MP3 format. There are sic ass cover versions of songs released every day and sometimes you wish you could listen to it in your car, jogging, etc. well now you can. this is an online converter that takes the HTML and links it to make an MP3 file out of your favorite cover versions of songs, or maybe songs ITunes or Frostwire doesnt even have. Clink the link below to get started and download your favorite MP3's now.
Monday, July 11, 2011
PSP Game Catigories 6.XX CFW
This is a video on how to install an SEplugin called Game Categories to your PSP running on 6.XX Custom Firmwares.
After downloading the RAR file, extract or open the file to see the "categorise_light_63X" folder inside the RAR file and in that folder will be the seplugins folder and open that up to see the "category_light.prx" place that PRX file in the seplugins folder on the root of your PSP's Memory Stick (MS) and then in the vsh.txt document that you should have in the seplugins folder write in it "mso:/seplugins/category_light.prx 1" (no quotes) and then you just exit USB mode, go to the recovery menu and plugins and enable it and your done.
Link: http://www.megaupload.com/?d=KYD8GTP2
After downloading the RAR file, extract or open the file to see the "categorise_light_63X" folder inside the RAR file and in that folder will be the seplugins folder and open that up to see the "category_light.prx" place that PRX file in the seplugins folder on the root of your PSP's Memory Stick (MS) and then in the vsh.txt document that you should have in the seplugins folder write in it "mso:/seplugins/category_light.prx 1" (no quotes) and then you just exit USB mode, go to the recovery menu and plugins and enable it and your done.
Link: http://www.megaupload.com/?d=KYD8GTP2
POPS for 6.XX CFW PSP
This is a video on how to use POPS on your PSP Running on 6.XX Custom Firmware (CFW). After downloading the file, extract the content and place the pops_bridge.prx in the seplugins folder on the PSP Memory Stick (MS) root. once you've done that, open up your POPS, or right click and create a "new text Doc", and write in it "ms0:/seplugins/pops_bridge.prx" (no quotes) and then exit and save. Exit USB mode and go to the Recovery menu and on it go to plugins and Enable pops_bridge.prx and your done :p
Link: http://www.megaupload.com/?d=PFNY1PV5
Link: http://www.megaupload.com/?d=PFNY1PV5
PRO B8 Install CFW 6.39 6.20 6.35 on PSP ALL MODELS!!
This is a video on how to install Custom Firmware (CFW) 6.39, 6.35 and 6.20 PRO B8 on your PSP.
Download whatever firmware you prefer in the links below and follow the tutorial.
6.39PRO Install: Extract the files from the download and drag and drop the PRO UPDATE folder into the PSP GAME folder and also drag and drop the CIPL Flasher folder into the PSP GAME folder. Exit USB mode and run the PRO UPDATE first and then after that if you are using a PSP 1000 model or 2000 model use the CIPL flasher. DO NOT USE CIPL FLASHER ON PSP 2000 V2, 3000 or GO!
6.35PRO Install: Extract the files from the download and put the PSP in USB mode. Drag and drop the PRO UPDATE folder into the PSP GAME folder and the PRO_PERMANENT folder into the PSP GAME folder as well. Exit USB mode and run the PRO UPDATE first and then once that is done, if you are on a PSP 1000 or 2000 model, run the permanent flasher. DO NOT USE PERM. FLASHER ON PSP 2000 V2, 3000 or GO!
6.20PRO Install: Extract the files from download and connect the USB. Drag and drop the PRO UPDATE folder into the PSP Game folder and then exit USB mode. Run the PRO UPDATE and your Done.
6.39PRO: http://www.megaupload.com/?d=SGS8DQJ7
6.35PRO: http://www.megaupload.com/?d=CYUJNOZC
6.20PRO: http://www.megaupload.com/?d=JCA9W005
Download whatever firmware you prefer in the links below and follow the tutorial.
6.39PRO Install: Extract the files from the download and drag and drop the PRO UPDATE folder into the PSP GAME folder and also drag and drop the CIPL Flasher folder into the PSP GAME folder. Exit USB mode and run the PRO UPDATE first and then after that if you are using a PSP 1000 model or 2000 model use the CIPL flasher. DO NOT USE CIPL FLASHER ON PSP 2000 V2, 3000 or GO!
6.35PRO Install: Extract the files from the download and put the PSP in USB mode. Drag and drop the PRO UPDATE folder into the PSP GAME folder and the PRO_PERMANENT folder into the PSP GAME folder as well. Exit USB mode and run the PRO UPDATE first and then once that is done, if you are on a PSP 1000 or 2000 model, run the permanent flasher. DO NOT USE PERM. FLASHER ON PSP 2000 V2, 3000 or GO!
6.20PRO Install: Extract the files from download and connect the USB. Drag and drop the PRO UPDATE folder into the PSP Game folder and then exit USB mode. Run the PRO UPDATE and your Done.
6.39PRO: http://www.megaupload.com/?d=SGS8DQJ7
6.35PRO: http://www.megaupload.com/?d=CYUJNOZC
6.20PRO: http://www.megaupload.com/?d=JCA9W005
Friday, June 24, 2011
PSP Firmware 9.90 Fix
This is a video on how to fix the updating problem on the PSP Custom Firmware (CFW) 5.50 GEN or Prometheus 4. If you ever get the error that says your running on 9.90 and there is no need to update, well heres how to fix that problem.
Step 1: Take your PSP and hit the SELECT button on the XMB and your VSH menu will appear. Change your USB device to "flash 0" and then hit SELECT again to leave the VSH menu.
Step 2: Plug in a USB cable and activate USB mode on the PSP and go to your My Computer (windows XP) or Computer (Windows Vista/7) and locate the removable drive for your PSP.
Step 3: Locate the vsh folder and open it and then inside that folder locate the etc folder and open that and you should see a version.txt
Step 4: open the version.txt document.
Step 5: the first set of number should say "9.90" if you are having this problem. Change those numbers to "5.50" and then save and exit the version.txt document.
Step 6: exit USB mode and go back to the XMB and hit SELECT and change your USB device to Memory Stick (MS) and SELECT to exit and save and your done.
Now you can Update no problem :p
Step 1: Take your PSP and hit the SELECT button on the XMB and your VSH menu will appear. Change your USB device to "flash 0" and then hit SELECT again to leave the VSH menu.
Step 2: Plug in a USB cable and activate USB mode on the PSP and go to your My Computer (windows XP) or Computer (Windows Vista/7) and locate the removable drive for your PSP.
Step 3: Locate the vsh folder and open it and then inside that folder locate the etc folder and open that and you should see a version.txt
Step 4: open the version.txt document.
Step 5: the first set of number should say "9.90" if you are having this problem. Change those numbers to "5.50" and then save and exit the version.txt document.
Step 6: exit USB mode and go back to the XMB and hit SELECT and change your USB device to Memory Stick (MS) and SELECT to exit and save and your done.
Now you can Update no problem :p
Subscribe to:
Posts (Atom)