iPhone 4 Digitizer LCD Assembly Replacement

This is a video on how to replace your LCD Digitizer Assembly on your iPhone 4, This is for Sprint and Verision phones, The At&t model is slightly different but you can use this video as a guideline just as well.

Step 1:  Take out the Micro Star screwdriver and remove the Two screws at the bottom of the phone and slide the back off.

Step 2:  Remove the battery by removing the Two screws holding the Panel on and unclipping the batter, Pry it out with the Guitar pic like pry tool. You need the Micro Phillips head for the screws.

Step 3:  Remove the screws on the other two panels, one screw on the bottom holding the Speaker and Mic in place and then 2 more on the panel for the ribbon cable for the speaker and mic, then finally the top 5 for the board cover, 2 of these screws are of different size and need to go into the proper place when putting it back together.

Step 4:  After removing the panels, carefully pry the ribbon connectors out with the pry tool, then remove the Speaker and Mic from the bottom, after that remove the 3 screws holding in the board with the Phillips head and lift the board up from the bottom and slide towards you gently.

Step 5:  Remove the 4 corner screws on the inside of the frame and then the three screws on the sides of the frame so all together you're removing 10 screws, the corners are only for the corners and the sides are only for the sides. take a good look at how the assembly sits as well so you don't damage the new one when you put it in, also if there is a Bios CMOS battery (Sprint Usually) just pop it out it's only slightly glued. Now remove the Assembly.

Step 6:  Place the new LCD Digitizer assembly into place and then reverse the Disassembly process.

Congratulations you succeeded in replacing your LCD Digitizer Assembly.

Webtastic Homebrew Browser Works on PSP OFW

This is the newer replacement for the HTMLMaxEngine  you may remember from back in the day. This is called Webtastic, and I've signed it to work on OFW, How cool is that. Note though it will also work on CFW as well, but with PSP Go it must be put on a Memory stick in order to work properly.

Step 1:  Download the Webtastic1.11_Fixed_Signed and extract the files and you will see the Webtastic folder and in there there will be a PSP folder open that and you will see the Webtastic1.1 folder.

Step 2:  Put PSP into USB mode and access your Memory stick (MS) and go into the ms0:/PSP/GAME folder. Now Copy the Webtastic1.1 folder into the PSP/GAME folder from your extracted files and then exit USB Mode.

Step 3:  Go to the MS on your PSP's XMB and start the Application, it has a few bugs, like no cursor, but it is faster and works with OFW.

Link:  http://www.softwarereborn.com/uploads/3/5/5/2/3552885/webtastic1.11_fixed_signed.rar

ZombieInf 2 Homebrew Game PSP

This is a Little Hombrew game called ZombieInf2. Basically your just running to the right shooting zombies and jumping lol, Bringing back jump and shoot man heres the download and how to install below.

Step 1:  Download and extract the ZombieInf2.RAR file and you will see the ZombieInf2 folder inside there.

Step 2:  Connect your PSP into USB mode and go to the ms0:/PSP/GAME folder, or for PSP go if you use HDD ef0:/PSP/GAME folder, and copy the ZombieInf2 folder to your GAME folder.

Step 3:  Exit USB mode and there ya go you can now kill zombies by scrolling to the game on the XMB.

Link:  http://www.softwarereborn.com/uploads/3/5/5/2/3552885/zombiesinf2.rar

Frostwire For Ubuntu 12.04

This is the version of FrostWire for Ubuntu, Use this for Downloading and managing pretty much anything.

Step 1:  Download and select Open with... the Frostwire file below and once the download is complete, Ubuntu Software Center will open Automatically. It wont work the other way for some reason if you Save the file so be sure to select Open With...

Step 2: Click install and punch in your user password, the password you created when you loaded the operating system, and then Authenticate.

Step 3:  Once installation is done open FrostWire from the Ubuntu Launcher and it will load an set up the software according to the video, Seed downloaded Torrents, English, I Will Not... ETC.

Step 4:  Change any settings to your liking and apply Changes

Link:  http://www.softwarereborn.com/uploads/3/5/5/2/3552885/frostwire-5.3.9.all.deb

Audio Converter Ubuntu

This is a nice and easy Audio converter for Ubuntu that supports all Audio formats and converst them to OGG Audio to be compatable with Linux bassed editing software.

Step 1: Open Ubuntu Software Center and search Audio Converter and clickonthe one showed in this video, install and Authenticte.

Step 2: bassically just test it out :p

Video Editing Software Linux

This is Video editing software for Ubuntu. Simple and easy to understand and down below is the installation procedure.

Step 1:  Go into the Ubuntu Software Center and search LiVES and you will see the application come up, click on it and click Install.

Step 2:  Type your User Password that you created when you loaded the Operating System and click Authenticate.

Step 3:  Once installed, open the program and enjoy and explore it.

Have Custom Wallpapers on Windows 7 Starter

This is a PC tutorial for Windows 7 Starter users, if you want a custom background wallpaper for your desktop, here's how to do it. You will need two things the file provided below and a Windows 7 Starter edition Operating system.

Step 1:  Download the file below with the link provided and save it, extract the files and you will see the Application file. Run the Application and allow it to install to your system settings.

Step 2:  After installing it will call for a Reboot so go ahead and reboot your PC

Step 3:  After the reboot, you'll notice their custom logo come up on the Desktop, open the program and manually choose the background of your choice and check the box in the left hand corner, if you want a slideshow on your Desktop check multiple photos and save the changes and presto! Backgrounds on Windows 7 Starter.

Link :  http://www.softwarereborn.com/uploads/3/5/5/2/3552885/oceanis_change_background_w7.zip