This is a Review of the new Custom Firmware (CFW) 6.60 GOD-A and i just simply show it Capabilities. Enjoy
Wednesday, September 28, 2011
6.XX GOD A CFW
This is the New GOD A Custom Firmware (CFW) for All PSP models including Go. You can use this on 6.60, 6.39, 6.35 and 6.20 Official Firmware (OFW) or CFW. After downloading the file provide proceed with the following.
Step 1: Extract files and you will see the following folders: 6.60 GOD A, 6.39 GOD A, 6.35 GOD A and 6.20 GOD A. Open the folder for your firmware and inside you will see Permanent for PSP 1000 and 2000v1 models and GOD and FastRecovery for PSP 2000v2, 3000 and Go models.
Step 2: After selecting the folder for your firmware, For PSP 1000 and 2000v1 models take the Permanent folder and place it in the ms0:/PSP/GAME folder and for PSP 2000v2, 3000 and Go models place it in the ef0:/PSP/GAME folder.
Step 3: Run the installer from GAME on the PSP for 1000 and 2000v1 models and your done. On the 2000v2, 3000 and Go Models Run the installer from GAME and then set up your settings and use Fast Recovery and your done.
Link: http://www.megaupload.com/?d=0FRWLUA5
NOTE: DO NOT USE PERMANENT ON MODELS HIGHER THAN PSP 2000v2
Step 1: Extract files and you will see the following folders: 6.60 GOD A, 6.39 GOD A, 6.35 GOD A and 6.20 GOD A. Open the folder for your firmware and inside you will see Permanent for PSP 1000 and 2000v1 models and GOD and FastRecovery for PSP 2000v2, 3000 and Go models.
Step 2: After selecting the folder for your firmware, For PSP 1000 and 2000v1 models take the Permanent folder and place it in the ms0:/PSP/GAME folder and for PSP 2000v2, 3000 and Go models place it in the ef0:/PSP/GAME folder.
Step 3: Run the installer from GAME on the PSP for 1000 and 2000v1 models and your done. On the 2000v2, 3000 and Go Models Run the installer from GAME and then set up your settings and use Fast Recovery and your done.
Link: http://www.megaupload.com/?d=0FRWLUA5
NOTE: DO NOT USE PERMANENT ON MODELS HIGHER THAN PSP 2000v2
Thursday, September 22, 2011
CFW 6.60ME 1.4
This is the New Custom Firmware (CFW) 6.60ME 1.4 for PSP 1000, 2000 models. There is also a Light CFW (LCFW) for PSP 2000v2, 3000 and PSP Go and the link will be posted below. I give a brief on how to install the LCFW but i will make a video for it soon on a PSP Go.
After downloading the file for whatever PSP model you have, extract the files to your desktop or open them using an extraction program. You will see the Release 6.60ME folder and then open it. Inside will be the leda folder and the UPDATE folder.
Step 1: Attach the PSP via USB and open the Memory Stick (MS) and on the root of the MS create a folder, If you haven't already, called "seplugins" (NO QUOTES) and open it. Open the Leda folder in the extracted files and you will see a leda.prx and a readme.txt. Take the leda.prx and drag that into the seplugins folder. If you have a previous one in there, replace it with the new one. Now on the PSP seplugins folder create a new txt document called "game" and open that and type in it "ms0:/seplugins/leda.prx 1" and exit and save.
Step 2: Go back to the MS root on the PSP and open the the PSP folder and then the GAME folder and from the extracted files take the UPDATE folder and copy that into ms0:/PSP/GAME and thats it.
NOTE: If you are updating from a lower CFW than 6.60, Download the OFW 6.60.PBP and place that in the UPDATE folder inside ms0:/PSP/GAME.
Step 3: Exit everything and now run the installer from the XMB and your done
CFW: http://www.megaupload.com/?d=Z29XVY57
LCFW: http://www.megaupload.com/?d=17AO3WPZ
OFW: http://www.megaupload.com/?d=I9RHV7BY
After downloading the file for whatever PSP model you have, extract the files to your desktop or open them using an extraction program. You will see the Release 6.60ME folder and then open it. Inside will be the leda folder and the UPDATE folder.
Step 1: Attach the PSP via USB and open the Memory Stick (MS) and on the root of the MS create a folder, If you haven't already, called "seplugins" (NO QUOTES) and open it. Open the Leda folder in the extracted files and you will see a leda.prx and a readme.txt. Take the leda.prx and drag that into the seplugins folder. If you have a previous one in there, replace it with the new one. Now on the PSP seplugins folder create a new txt document called "game" and open that and type in it "ms0:/seplugins/leda.prx 1" and exit and save.
Step 2: Go back to the MS root on the PSP and open the the PSP folder and then the GAME folder and from the extracted files take the UPDATE folder and copy that into ms0:/PSP/GAME and thats it.
NOTE: If you are updating from a lower CFW than 6.60, Download the OFW 6.60.PBP and place that in the UPDATE folder inside ms0:/PSP/GAME.
Step 3: Exit everything and now run the installer from the XMB and your done
CFW: http://www.megaupload.com/?d=Z29XVY57
LCFW: http://www.megaupload.com/?d=17AO3WPZ
OFW: http://www.megaupload.com/?d=I9RHV7BY
Saturday, September 10, 2011
Change your PS3 Hard Drive
This is a video on how to Change your PS3's Hard Drive (HDD). You must use a SATA HDD it cannot be IDE.
Step 1: Remove Door/Flap on the bottom of the PS3.
Step 2: Remove Blue Screw.
Step 3: Turn the PS3 so that your reading "PlayStation 3 correctly and turn the hinge on the HDD port out and slide it to the right first and then pull out towards you and you will be holding the HDD.
Step 4: Remove all four (4) screws on the HDD holder and slide out the HDD.
Step 5: Place the NEW HDD in the holder and put the four (4) screws back in to secure the HDD. Make sure that the SATA ports are exposed and are not blocked.
Step 6: Slide in the holder with the hinge facing out and now slide it to the left and it will click/secure into place.
Step 7: Put back the blue screw and place the door/cover back on
Step 8: Plug in your AC (power), AV cables (Audio Video), Ethernet and boot up the system.
Step 9: Format the HDD and wait.
Step 10: Reboot the system and wait for your PS3 to boot to the XMB and your done.
NOTE: Be SURE to back up all SAVE DATA before doing this Also must re-download all GAME DATA UTILITY once this is done
Step 1: Remove Door/Flap on the bottom of the PS3.
Step 2: Remove Blue Screw.
Step 3: Turn the PS3 so that your reading "PlayStation 3 correctly and turn the hinge on the HDD port out and slide it to the right first and then pull out towards you and you will be holding the HDD.
Step 4: Remove all four (4) screws on the HDD holder and slide out the HDD.
Step 5: Place the NEW HDD in the holder and put the four (4) screws back in to secure the HDD. Make sure that the SATA ports are exposed and are not blocked.
Step 6: Slide in the holder with the hinge facing out and now slide it to the left and it will click/secure into place.
Step 7: Put back the blue screw and place the door/cover back on
Step 8: Plug in your AC (power), AV cables (Audio Video), Ethernet and boot up the system.
Step 9: Format the HDD and wait.
Step 10: Reboot the system and wait for your PS3 to boot to the XMB and your done.
NOTE: Be SURE to back up all SAVE DATA before doing this Also must re-download all GAME DATA UTILITY once this is done
Friday, September 2, 2011
6.XX OFW Downgrader tool
This is how you downgrade and Official Firmware (OFW) higher than 6.20 back down to 6.20 OFW on your PSP. This again is able to be used on OFW PSP's and also use this at your own risk.
Take the file after downloading and extract the folder 6.XX Downgrader and place it in the ms0:/PSP/GAME folder and run it from the XMB and hit X to start the downgrade.
Link: http://www.megaupload.com/?d=FXNXM52C
NOTE: USE AT YOUR OWN RISK
RemoteJoyLite Video tutorial: http://www.youtube.com/watch?v=VwJMuFmTjgk
Take the file after downloading and extract the folder 6.XX Downgrader and place it in the ms0:/PSP/GAME folder and run it from the XMB and hit X to start the downgrade.
Link: http://www.megaupload.com/?d=FXNXM52C
NOTE: USE AT YOUR OWN RISK
RemoteJoyLite Video tutorial: http://www.youtube.com/watch?v=VwJMuFmTjgk
Review CFW 6.60 PRO B-9
This is the Review for Custom Firmware (CFW) or Light CFW (LCFW) 6.60 PRO B-9 for all PSP models. if you would like to update to this firmware follow my tutorial video on it here
Tutorial: http://www.youtube.com/watch?v=wHiercK1aQs
This also runs very good with the PSN so HORRAYYYYYYYYYYYY
Learn how to install RemoteJoyLite here
http://www.youtube.com/watch?v=VwJMuFmTjgk
Tutorial: http://www.youtube.com/watch?v=wHiercK1aQs
This also runs very good with the PSN so HORRAYYYYYYYYYYYY
Learn how to install RemoteJoyLite here
http://www.youtube.com/watch?v=VwJMuFmTjgk
Subscribe to:
Posts (Atom)