This is the New Custom Firmware (CFW) 6.60PRO B-9 for all PSP Models.
This is a Light CFW (LCFW) so this will work on PSP 3000 and Go.
PSP 1000 and 2000:
After Downloading the files and extracting them you should see a CIPL folder, FastRecovery folder and a PROUPDATE folder. Take the PROUPDATE and CIPL flasher folders and place them in the ms0:/PSP/GAME folder for either OFW or CFW install and then exit USB mode. On the XMB run the PRO UPDATE and then let it reboot, once you've done that, run the CIPL flasher, if you have one installed already, reinstall it and your done you now have CFW 6.60PRO B-9
PSP 2000V2, 3000 and GO
After Downloading the files and extracting them, take the PROUPDATE folder and place it in the ms0:/PSP/GAME folder as well as the FastRecovery Folder. then exit USB mode and go to the PSP XMB. Run the PRO UPDATE and then let it reboot. After that use the Fast Recovery as your recovery menu and plugin manager.
CFW LINK: http://www.megaupload.com/?d=KETQPDC2
UPDATE TO OFW 6.60
=================
Download this OFW 660.PBP and change the name to EBOOT.PBP and place it in an UPDATE folder in ms0:/PSP/GAME folder and run the installer from the XMB and then use the PRO UPDATE to flash install CFW.
OFW LINK: http://www.megaupload.com/?d=I9RHV7BY
Sunday, August 28, 2011
CFW 6.60ME 1.2 Bug Fix
This is the New Custom Firmware (CFW) 6.60ME 1.2 This fixes a few bugs and also enables a new CPU feature.
CFW INSTALL:
Take the files after downloading and extract them and you should see the release folder. On the root of the PSP memory Stick create a folder, if you haven't already, and call it "seplugins" (NO QUOTES) and open that up. Create a "game.txt" or open the one you already have up and inside write "ms0:/seplugins/leda.prx 1" and then exit and save the txt document. Once that has been done open up the leda folder in the extracted files and the drag and drop the leda.prx into the seplugins folder. If you have one there already, replace it just to be safe.
Now take the UPDATE folder from the extracted files and drag and drop the UPDATE folder into the PSP game folder other known as ms0:/PSP/GAME and then exit USB mode and run the installer on the XMB and your done.
If you are running CFW lower than 6.60, all you need to do is take the OFW Sony 660.PBP that i have for download and place it in the UPDATE folder inside the PSP GAME folder along with the CFW installer for ME 1.2
CFW: http://www.megaupload.com/?d=HR47S3K0
OFW: http://www.megaupload.com/?d=I9RHV7BY
NOTE: This is only for PSP 1000 and 2000 hackable models
CFW INSTALL:
Take the files after downloading and extract them and you should see the release folder. On the root of the PSP memory Stick create a folder, if you haven't already, and call it "seplugins" (NO QUOTES) and open that up. Create a "game.txt" or open the one you already have up and inside write "ms0:/seplugins/leda.prx 1" and then exit and save the txt document. Once that has been done open up the leda folder in the extracted files and the drag and drop the leda.prx into the seplugins folder. If you have one there already, replace it just to be safe.
Now take the UPDATE folder from the extracted files and drag and drop the UPDATE folder into the PSP game folder other known as ms0:/PSP/GAME and then exit USB mode and run the installer on the XMB and your done.
If you are running CFW lower than 6.60, all you need to do is take the OFW Sony 660.PBP that i have for download and place it in the UPDATE folder inside the PSP GAME folder along with the CFW installer for ME 1.2
CFW: http://www.megaupload.com/?d=HR47S3K0
OFW: http://www.megaupload.com/?d=I9RHV7BY
NOTE: This is only for PSP 1000 and 2000 hackable models
Tuesday, August 23, 2011
RemoteJoyLite Install on 6.60
This is Remote Joy Lite for your PSP running on Custom Firmware 6.60ME. This will also work on 5.00, 5.50, 6.20, and 6.3X CFW's.
In order for this to work properly you need to install the drivers and i will show you step by step on how to do this.
Step 1: Take the Remote Joy Lite files and extract them to the desktop of your PC and then open the folder.
Step 2: Take your PSP and connect it into USB mode and make a folder on the Memory Stick (MS) root called "seplugins" (NO QUOTES). Open that folder and place the RemoteJoyLite.prx inside this folder.
Step 3: Create a vsh.txt a game.txt and a pops.txt file(s) in the seplugins folder and inside the game and vsh txt files write "mso:/seplugins/RemoteJoyLite.prx 1" (NO QUOTES) and exit and save. In the pops.txt write the same thing as in the game and vsh txt files but also add "flash0:/kd/usb.prx 1" (NO QUOTES) and exit and save.
Step 4: Disconnect the PSP from USB mode and take out the USB. now run the PSPdisp installer that i have for download. Say YES to everything and when you get to the screen that says to locate the GAME5XX folder hit cancel and continue saying YES to all.
Step 5: plugin the usb and the driver should install fine. If not run the PSPdisp again only this time with the USB plugged into the PSP with it on the XMB Screen.
Enjoy your PC screen view of your PSP :p
NOTE: if your display crashes, hit select on the XMB on the PSP and hit reset device, in the middle of the reset, unplug the USB but dont close PSPDisp or Remote Joy. once XMB boots back up, plug in the USB.
PSPDisp: http://www.megaupload.com/?d=07UOCTB1
Remote Joy: http://www.megaupload.com/?d=HZ3HGMXV
In order for this to work properly you need to install the drivers and i will show you step by step on how to do this.
Step 1: Take the Remote Joy Lite files and extract them to the desktop of your PC and then open the folder.
Step 2: Take your PSP and connect it into USB mode and make a folder on the Memory Stick (MS) root called "seplugins" (NO QUOTES). Open that folder and place the RemoteJoyLite.prx inside this folder.
Step 3: Create a vsh.txt a game.txt and a pops.txt file(s) in the seplugins folder and inside the game and vsh txt files write "mso:/seplugins/RemoteJoyLite.prx 1" (NO QUOTES) and exit and save. In the pops.txt write the same thing as in the game and vsh txt files but also add "flash0:/kd/usb.prx 1" (NO QUOTES) and exit and save.
Step 4: Disconnect the PSP from USB mode and take out the USB. now run the PSPdisp installer that i have for download. Say YES to everything and when you get to the screen that says to locate the GAME5XX folder hit cancel and continue saying YES to all.
Step 5: plugin the usb and the driver should install fine. If not run the PSPdisp again only this time with the USB plugged into the PSP with it on the XMB Screen.
Enjoy your PC screen view of your PSP :p
NOTE: if your display crashes, hit select on the XMB on the PSP and hit reset device, in the middle of the reset, unplug the USB but dont close PSPDisp or Remote Joy. once XMB boots back up, plug in the USB.
PSPDisp: http://www.megaupload.com/?d=07UOCTB1
Remote Joy: http://www.megaupload.com/?d=HZ3HGMXV
Review CFW 6.60ME
This is a review of Custom Firmware (CFW) 6.60ME. I get to test out the new Remote Joy Lite on it too :D anywaysssssss, Ill be giving the demonstration and also the recommended settings on this firmware be sure to watch the tutorial on how to install this here
Link: http://www.youtube.com/watch?v=tqClmx3N0_c
Or Clink the link in the beginning of this video
Link: http://www.youtube.com/watch?v=tqClmx3N0_c
Or Clink the link in the beginning of this video
Tuesday, August 16, 2011
NEW CFW 6.60ME
This is the New Custom Firmware (CFW) 6.60ME. This is for PSP 1000 and 2000 hackable models only. No Light (CFW) [LCFW] yet but will come soon.
So i kinda got messed up in this video cause the Readme.txt was messed up so i fixed the files for you so you'll have no trouble :)
After downloading the CFW files if you open it or extract them you will see the release folder for 6.60ME, open that and you should see an UPDATE folder and a leda folder. Take the UPDATE folder and place it in the ms0:/PSP/GAME folder on the PSP Memory Stick (MS). Once you have done that take the leda folder in the downloaded files and open it and you should see a game.txt and the leda.prx. On the Root of the PSP MS make, if you haven't already, an seplugins folder al in lowercase letters and open it and copy the game.txt and the leda.prx from the downloaded files into this folder and make sure the game.txt has this written in it "ms0:/seplugins/leda.prx 1" (NO QUOTES).
If you have had ME CFW before be sure that you replace th leda.prx with the new one.
CFW: http://www.megaupload.com/?d=P7RD077D
OFW: http://www.megaupload.com/?d=I9RHV7BY
So i kinda got messed up in this video cause the Readme.txt was messed up so i fixed the files for you so you'll have no trouble :)
After downloading the CFW files if you open it or extract them you will see the release folder for 6.60ME, open that and you should see an UPDATE folder and a leda folder. Take the UPDATE folder and place it in the ms0:/PSP/GAME folder on the PSP Memory Stick (MS). Once you have done that take the leda folder in the downloaded files and open it and you should see a game.txt and the leda.prx. On the Root of the PSP MS make, if you haven't already, an seplugins folder al in lowercase letters and open it and copy the game.txt and the leda.prx from the downloaded files into this folder and make sure the game.txt has this written in it "ms0:/seplugins/leda.prx 1" (NO QUOTES).
If you have had ME CFW before be sure that you replace th leda.prx with the new one.
CFW: http://www.megaupload.com/?d=P7RD077D
OFW: http://www.megaupload.com/?d=I9RHV7BY
Tuesday, August 9, 2011
New CFW 6.39ME-9.2
This is a new Custom Firmware (CFW) that came out for PSP 1000 and 2000 models and this is how to install CFW 6.39ME-9.2 This firmware fixes a couple bugs and also adds a few more things.
Take the file that i have for download and extract the files to your destop and open them. take the UPDATE folder and place it in the ms0:/PSP/GAME folder and then take the leda folder and open it and if not already, create a folder called seplugins on the memory stick (MS) root of the PSP and open it. then place the leda.prx file inside the seplugins folder. after that create a new txt document called GAME.txt and inside type "ms0:/seplugins/leda.prx 1" (no quotes) and then exit and save.
once all thats done, exit USB mode and then run the installer under game and your done.
NOTE: ONLY FOR PSP 1000 AND 2000 MODELS ONLY WORKS ON 6.39 CFW (NOT SIGNED)
Link: http://www.megaupload.com/?d=YM3EK66E
Take the file that i have for download and extract the files to your destop and open them. take the UPDATE folder and place it in the ms0:/PSP/GAME folder and then take the leda folder and open it and if not already, create a folder called seplugins on the memory stick (MS) root of the PSP and open it. then place the leda.prx file inside the seplugins folder. after that create a new txt document called GAME.txt and inside type "ms0:/seplugins/leda.prx 1" (no quotes) and then exit and save.
once all thats done, exit USB mode and then run the installer under game and your done.
NOTE: ONLY FOR PSP 1000 AND 2000 MODELS ONLY WORKS ON 6.39 CFW (NOT SIGNED)
Link: http://www.megaupload.com/?d=YM3EK66E
Subscribe to:
Posts (Atom)