This is a review video for CFW and Light (LCFW) 6.60 ME 1.8 There was a 1.7 ME CFW but i just skipped that because this 1.8 ME CFW literally came out like a day later. This is a very good CFW and i recommend it to you. The install Video will be up shortly and a link for the install will be available.
Wednesday, April 11, 2012
Sunday, April 1, 2012
Jailbreak IOS 5.1 Tethered RedSn0w
This is a Video on how to jailbreak your IDevice running on IOS 5.1 using Redsn0w. This is a Tethered Jailbreak so you will need to boot with RedSn0w everytime you reboot your phone.
Step 1: Download the file i give to you and extract them, Open Redsn0w and plug in your IDevice in the off mode. Follow the Steps to put it into DFU mode. Hold down the Power button and Home button for about 3 seconds then release the Power button and continue to hold the Home button until your computer reads your device.
Step 2: Hit jailbreak and it will run and do its thing. After the jailbreaking is complete, it will now require you to put it back into DFU mode, then open up Redsn0w and hit Extras, Click Boot Tethered now and it will boot your phone.
Step 3: Set up Cydia as user and everything will be set.
Pretty simple but NOTE This is not for IPhone 4S or IPad 2
Link http://www.softwarereborn.com/ios-51.html
Step 1: Download the file i give to you and extract them, Open Redsn0w and plug in your IDevice in the off mode. Follow the Steps to put it into DFU mode. Hold down the Power button and Home button for about 3 seconds then release the Power button and continue to hold the Home button until your computer reads your device.
Step 2: Hit jailbreak and it will run and do its thing. After the jailbreaking is complete, it will now require you to put it back into DFU mode, then open up Redsn0w and hit Extras, Click Boot Tethered now and it will boot your phone.
Step 3: Set up Cydia as user and everything will be set.
Pretty simple but NOTE This is not for IPhone 4S or IPad 2
Link http://www.softwarereborn.com/ios-51.html
Tuesday, March 20, 2012
Links Links Links
So ive updated the links and everything again and im still working on getting all of them up. Soon everything will be up and back on schedule. More tutorials coming in the next month and hopefully will have my hands on a PS Vita so stay tunned and keep watching my other Blog and Twitter.
Saturday, February 25, 2012
Lets Get Going Guys!!!
Ok guys, todays the day, im at work right now but im going to be up late tonight taking as many files as i can on the website for download. I will be uploading them tonight and they will be available asap, Also if your willing to donate for me to have complete control of my own website i will love you forever and your name and website if you have one, will be featured on my YouTube channel :) Thank you so much for all the support and im putting my heart into what i want, as well as what you want, Software Reborn to be.
Wednesday, February 22, 2012
XBOX 360 Red Ring Fix
Tis is a video on how to Fix your XBOX 360 that has any of the Red Rings, This does not fix the E-68 because that is a HDD problem. In this video, I go step by step in dis-assembly to cleaning and heat treating the board, to applying therman compound and re-assembly.
TOOLS:
Small Flat Head Screwdriver
T-10 and T-8 Tork Screwdriver
Rubbing Alcohol and WD-40
Thermal Compound
Heat Gun
Something to Pry with for X-Clamps
Cotton Balls or Cu-Tips
Step 1: Take a Small Flat Head Screwdriver and after removing the front panel, take the screwdriver and pop out the grey or black if its an Elite, side panels by releasing the pins shown in the video
Step 2: Using the same small Flat Head Screwdriver, on the back of the XBOX you will see 7 slots, those slots contain clips that need to be pushed in. Use the flat head to push these in and relieve the clips and the XBOX will pop open on the back side, then relieve the clips on the front with either the screwdriver or your fingernails and the bottom of the XBOX casing will come off.
Step 3: Take the T-10 Tork screwdriver and remove the 6 long screws and the 9 short screws holding the motherboard in place. Then take the T-8 Tork screwdriver and remove the 8 X-Clamp screws. Flip the XBOX over and remove the top panel of the casing.
Step 4: Now remove the disk drive by lifting up on the back and the front and then unplug the power and the sata cable. Also take out the white ventilation for the heat syncs by using a flat head screwdriver to pop the pin in the center down and pull it out. Also unplug the fans.
Step 5: The main panel on the front of the XBOX has the white flap on it, remove the top firs and then slide it down and off, remove the 3 screws with a T-8 Tork screwdriver and then pull out the board. Once that is done, lift up on he front of the main board and slide it out forward.
Step 6: Take the pry tool that you have selected and place it in between the X-clamp and where screw goes and push down towards the board so that you lift up the X-clamp, then simply pry on the sides of the joints and remove the X-clamps and the heat syncs and now you have just the board.
Step 7: Take either Alcohol or WD-40 to clean off the Heat syncs and the processors with a cotton ball or cu-tip. If using WD-40, wipe down with Alcohol after.
Step 8: Heat Treat the board with a Heat Gun, Preheat the board for about 2:30 minutes to 4:00 minutes, Then with a circular motion heat up the CPU and GPU for about 5:00 minutes, Then re-heat the board for about another 2:30 to 4:00 minutes so it cool evenly and let the board cool for about 1 to 2 hours minimum.
Step 9: Once the Board has cooled down, Clean the Processors on last time with Alcohol and then apply Thermal Compound for a layer just on top of the chips.
Step 10: Place the heat syncs on at a time on the board, I recommend doing the Square one first, place it on the board and flip it over, heat sync to the table and apply pressure to the board, take an X-clamp and place two of the clamps by just sliding them on then using the pry tool, pry the other two clamps into place and wait till you hear them click. do the same with the other heat sync.
Step 11: Take the white ventilation plastic piece and place it into place on the board, then take the disk drive and plug in the power and sata cables and put the drive into place, plug in the fans and then take the top of the XBOX panel and place it on and flip the XBOX over showing where the screws go. Take the 9 shorter screws and screw them in with a T-10 Tork and the 8 x-clamp screws with a T-8 Tork screwdriver. Flip it back over and remove the top panel again.
Step 12: Take the front power board and place it into place and screw in the 3 screws with a T-8 Tork, after that place the white flap with the arrows pointing up back on bottom first and then put the top exterior panel back on. Flip the XBOX over and screw in the 6 long screws to hold the top panel in place.
Step 13: Put the Disk driver button back into place and be sure it clicks, then take the bottom exterior panel and place it on front first and it should just click into place, on the back push it in and then press against the back of the XBOX until they all click into place. Put the side panels on and then test out your now fixed XBOX 360
TOOLS:
Small Flat Head Screwdriver
T-10 and T-8 Tork Screwdriver
Rubbing Alcohol and WD-40
Thermal Compound
Heat Gun
Something to Pry with for X-Clamps
Cotton Balls or Cu-Tips
Step 1: Take a Small Flat Head Screwdriver and after removing the front panel, take the screwdriver and pop out the grey or black if its an Elite, side panels by releasing the pins shown in the video
Step 2: Using the same small Flat Head Screwdriver, on the back of the XBOX you will see 7 slots, those slots contain clips that need to be pushed in. Use the flat head to push these in and relieve the clips and the XBOX will pop open on the back side, then relieve the clips on the front with either the screwdriver or your fingernails and the bottom of the XBOX casing will come off.
Step 3: Take the T-10 Tork screwdriver and remove the 6 long screws and the 9 short screws holding the motherboard in place. Then take the T-8 Tork screwdriver and remove the 8 X-Clamp screws. Flip the XBOX over and remove the top panel of the casing.
Step 4: Now remove the disk drive by lifting up on the back and the front and then unplug the power and the sata cable. Also take out the white ventilation for the heat syncs by using a flat head screwdriver to pop the pin in the center down and pull it out. Also unplug the fans.
Step 5: The main panel on the front of the XBOX has the white flap on it, remove the top firs and then slide it down and off, remove the 3 screws with a T-8 Tork screwdriver and then pull out the board. Once that is done, lift up on he front of the main board and slide it out forward.
Step 6: Take the pry tool that you have selected and place it in between the X-clamp and where screw goes and push down towards the board so that you lift up the X-clamp, then simply pry on the sides of the joints and remove the X-clamps and the heat syncs and now you have just the board.
Step 7: Take either Alcohol or WD-40 to clean off the Heat syncs and the processors with a cotton ball or cu-tip. If using WD-40, wipe down with Alcohol after.
Step 8: Heat Treat the board with a Heat Gun, Preheat the board for about 2:30 minutes to 4:00 minutes, Then with a circular motion heat up the CPU and GPU for about 5:00 minutes, Then re-heat the board for about another 2:30 to 4:00 minutes so it cool evenly and let the board cool for about 1 to 2 hours minimum.
Step 9: Once the Board has cooled down, Clean the Processors on last time with Alcohol and then apply Thermal Compound for a layer just on top of the chips.
Step 10: Place the heat syncs on at a time on the board, I recommend doing the Square one first, place it on the board and flip it over, heat sync to the table and apply pressure to the board, take an X-clamp and place two of the clamps by just sliding them on then using the pry tool, pry the other two clamps into place and wait till you hear them click. do the same with the other heat sync.
Step 11: Take the white ventilation plastic piece and place it into place on the board, then take the disk drive and plug in the power and sata cables and put the drive into place, plug in the fans and then take the top of the XBOX panel and place it on and flip the XBOX over showing where the screws go. Take the 9 shorter screws and screw them in with a T-10 Tork and the 8 x-clamp screws with a T-8 Tork screwdriver. Flip it back over and remove the top panel again.
Step 12: Take the front power board and place it into place and screw in the 3 screws with a T-8 Tork, after that place the white flap with the arrows pointing up back on bottom first and then put the top exterior panel back on. Flip the XBOX over and screw in the 6 long screws to hold the top panel in place.
Step 13: Put the Disk driver button back into place and be sure it clicks, then take the bottom exterior panel and place it on front first and it should just click into place, on the back push it in and then press against the back of the XBOX until they all click into place. Put the side panels on and then test out your now fixed XBOX 360
Friday, January 27, 2012
Untethered Jailbreak IOS 5.0.1 Greenpoisi0n Iphone 4s Ipad 2
This is the new Unteather jailbreak for IOS 5.0.1 on your IPhone 4S and IPad 2 devices.
Just go to http://greenpois0n.com/ and download the version you need and run the exe.
Put your device in DFU mode and jailbreak it :D
Just go to http://greenpois0n.com/ and download the version you need and run the exe.
Put your device in DFU mode and jailbreak it :D
Wednesday, January 25, 2012
Help Create Software Reborn :D
Hey guys so i was looking into a few things and now i have a plan that i think everyone will love. I have my website called Software Reborn. Well its just a free version of the website that i use to keep everyone in the loop of whats going on with Software and Hardware issues around the globe. I want to be able to place all the files for my videos on this website so you can again have virus free downloads of the files you need to make the task of my videos plain and simple just the way everyone likes it.
To make this happen, i ask from you my viewers and all of your support, if you wish you can leave a donation to PayPal below. It can be anything from 10 cents to 10 dollars, anyway i would be grateful in the end. Lets make my website and Software and Hardware Trouble shooting the way it should be together.
Thank You sooooooo Much for all your support
-Rob Paps
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=CUSB9NADZFJ...
To make this happen, i ask from you my viewers and all of your support, if you wish you can leave a donation to PayPal below. It can be anything from 10 cents to 10 dollars, anyway i would be grateful in the end. Lets make my website and Software and Hardware Trouble shooting the way it should be together.
Thank You sooooooo Much for all your support
-Rob Paps
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=CUSB9NADZFJ...
Subscribe to:
Posts (Atom)